nach oben

Erschienen in:

05.02.2024 | STRENGTH AND PLASTICITY

Effect of Heat Treatment on Wire + Arc Additive Manufactured Aluminum 5356 Alloy: Mechanical Properties and Microstructure Correlation

verfasst von: N. Harshavardhana, S. P Sundar Singh Sivam, Rahul Ryan Savio, Ahin Honymon, V. Apramayan, Gulshan Kumar, Ashish Kumar Saxena

Erschienen in: Physics of Metals and Metallography | Ausgabe 14/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the aluminum 5356 (Al5356) component was fabricated by Wire Arc Additive Manufacturing (WAAM) process and subjected to heat treatment at three different temperatures i.e., 450, 525, and 600°C. Detailed mechanical and microstructural characterization was performed on the as-fabricated and heat-treated samples to correlate the change in mechanical properties with its corresponding microstructure. The mechanical properties were estimated using the tensile and Rockwell hardness tester, and the microstructural characterization was performed using Scanning Electron Microscopy (SEM) and Electron Backscattered Diffraction (EBSD) technique. The samples heat-treated at 450°C show superior strength (i.e. UTS 260 MPa) as compared to as-fabricated, heat-treated at 525 and 600°C due to the beneficial evolution of fine second phase particles after heat treatment.

Vorheriger Artikel Characterization of a Duplex Coating (Boriding + Hydroxyapatite) on Austenitic Steel

Nächster Artikel Effect of Annealing on Microstructure and Mechanical Properties of Al–18Si Alloy Cast by Melt Quenching

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

T. A. Rodrigues, V. Duarte, R. M. Miranda, T. G. Santos, and J. P. Oliveira, “Current status and perspectives on wire and arc additive manufacturing (WAAM),” Materials 12, 1121 (2019). https://doi.org/10.3390/ma12071121ADSCrossRefPubMedCentralPubMed

M. Köhler, S. Fiebig, J. Hensel, and K. Dilger, “Wire and arc additive manufacturing of aluminum components,” Metals 9, 608 (2019). https://doi.org/10.3390/met9050608CrossRef

W. E. Frazier, “Metal additive manufacturing: A review,” J. Mater. Eng. Perform. 23, 1917–1928 (2014). https://doi.org/10.1007/s11665-014-0958-zCrossRef

K. S. Derekar, “A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium,” Mater. Sci. Technol. 34, 895–916 (2018). https://doi.org/10.1080/02670836.2018.1455012ADSCrossRef

J. R. Davis, “Introduction to aluminum and aluminum alloys,” in Metals Handbook Desk Edition (ASM International, 2001), pp. 417–423. https://doi.org/10.31399/asm.hb.mhde2.a0003121CrossRef

J. G. Kaufman and E. L. Rooy, Aluminum Alloy Castings (ASM International, 2004). https://doi.org/10.31399/asm.tb.aacppa.9781627083355CrossRef

S. Li, L.-J. Zhang, J. Ning, X. Wang, G.-F. Zhang, J.‑X. Zhang, S.-J. Na, and B. Fatemeh, “Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas,” Addit. Manuf. 34, 101206 (2020). https://doi.org/10.1016/j.addma.2020.101206CrossRef

G. Saad, S. A. Fayek, A. Fawzy, H. N. Soliman, and E. Nassr, “Work hardening characteristics of gamma-ray irradiated Al-5356 alloy,” Mater. Sci. Eng., A 607, 132–137 (2014). https://doi.org/10.1016/j.msea.2014.03.137CrossRef

S. Sanamar, H. Brokmeier, and N. Schell, “Phase evolution of Al–Mg metal matrix composites during low temperature annealing at 200°C and 250°C,” Intermetallics 124, 106862 (2020). https://doi.org/10.1016/j.intermet.2020.106862CrossRef

10.

J. Wang, Q. Shen, X. Kong, and X. Chen, “Arc additively manufactured 5356 aluminum alloy with cable-type welding wire: Microstructure and Mechanical Properties,” J. Mater. Eng. Perform. 30, 7472–7478 (2021). https://doi.org/10.1007/s11665-021-05905-yCrossRef

11.

C. Li, H. Gu, W. Wang, S. Wang, L. Ren, Z. Wang, Z. Ming, and Yu. Zhai, “Effect of heat input on formability, microstructure, and properties of Al–7Si–0.6Mg alloys deposited by CMT-WAAM process,” Appl. Sci. 10, 70 (2019). https://doi.org/10.3390/app10010070ADSCrossRef

12.

D. Su, J. Zhang, and B. Wang, “The microstructure and weldability in welded joints for AA 5356 aluminum alloy after adding modified trace amounts of Sc and Zr,” J. Manuf. Processes 57, 488–498 (2020). https://doi.org/10.1016/j.jmapro.2020.07.017CrossRef

13.

C. Ma, Yu. Yan, Z. Yan, Yo. Liu, X. Wu, D. Li, L. Zhao, P. Liu, and H. Jin, “Investigation of bypass-coupled double-pulsed directed energy deposition of Al–Mg alloys,” Addit. Manuf. 58, 103058 (2022). https://doi.org/10.1016/j.addma.2022.103058CrossRef

14.

G. Saad, S. A. Fayek, A. Fawzy, H. N. Soliman, and E. Nassr, “Serrated flow and work hardening characteristics of Al-5356 alloy,” J. Alloys Compd. 502, 139–146 (2010). https://doi.org/10.1016/j.jallcom.2010.04.119CrossRef

15.

Ya. Geng, I. Panchenko, X. Chen, Yu. Ivanov, and S. Konovalov, “Wire arc additive manufacturing Al–5.0 Mg alloy: Microstructures and phase composition,” Mater. Charact. 187, 111875 (2022). https://doi.org/10.1016/j.matchar.2022.111875CrossRef

16.

M. Köhler, J. Hensel, and K. Dilger, “Effects of thermal cycling on wire and arc additive manufacturing of Al-5356 components,” Metals 10, 952 (2020). https://doi.org/10.3390/met10070952CrossRef

17.

ESAB. Aluminium 5356 Wires Autrod.

18.

M/s Kemppi. X8 MIG Welder (2022).

19.

ASTM E8/E8M standard test methods for tension testing of metallic materials. Annu. B. ASTM Stand. 4 ASTM E8 (2010).

20.

Standard Test Methods for Rockwell Hardness of Metallic Materials. ASTM Int. ASTM E18 (2015).

21.

S. Scudino, G. Liu, M. Sakaliyska, K. B. Surreddi, and J. Eckert, “Powder metallurgy of Al-based metal matrix composites reinforced with β-Al₃Mg₂ intermetallic particles: Analysis and modeling of mechanical properties,” Acta Mater. 57, 4529–4538 (2009). https://doi.org/10.1016/j.actamat.2009.06.017ADSCrossRef

22.

A. Ahmed, S. Akl, and A. S. Hassanien, Int. J. Adv. Res. 2 (11), 1–9 (2014). https://www.journalijar.com/ uploads/838_IJAR-4360.pdf.

23.

J. L. Murray, “The Al−Mg (aluminum−magnesium) system,” J. Phase Equilib. 3, 60–74 (1982). https://doi.org/10.1007/bf02873413CrossRef

24.

S. Bannour, K. Abderrazak, S. Mattei, J. E. Masse, M. Autric, and H. Mhiri, “The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds,” J. Laser Appl. 25, 032001 (2013). https://doi.org/10.2351/1.4792615ADSCrossRef

25.

W. Zuo, L. Ma, Yu. Lu, S. Li, Z. Ji, and M. Ding, “Effects of Solution treatment temperatures on microstructure and mechanical properties of TIG–MIG hybrid arc additive manufactured 5356 aluminum alloy,” Met. Mater. Int. 24, 1346–1358 (2018). https://doi.org/10.1007/s12540-018-0142-3CrossRef

26.

Ch. Su, X. Chen, C. Gao, and Ya. Wang, “Effect of heat input on microstructure and mechanical properties of Al–Mg alloys fabricated by WAAM,” Appl. Surf. Sci. 486, 431–440 (2019). https://doi.org/10.1016/j.apsusc.2019.04.255ADSCrossRef

Titel: Effect of Heat Treatment on Wire + Arc Additive Manufactured Aluminum 5356 Alloy: Mechanical Properties and Microstructure Correlation
verfasst von: N. Harshavardhana
S. P Sundar Singh Sivam
Rahul Ryan Savio
Ahin Honymon
V. Apramayan
Gulshan Kumar
Ashish Kumar Saxena
Publikationsdatum: 05.02.2024
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 14/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22601846

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 14/2023

Enhancing Steel Properties through Microstructure Design Using Cyclic Heat Treatment: A Comprehensive Review

Influence of the Microdroplets Sizes of Magnetic Emulsions on the Magneto-Optical Effect

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Auger Electron Spectroscopy of Thin Cr2GeC Films

Preparation and Properties of Magnetic Composites γ-Fe2O3/SiO2/Aptamer(FAS9) for Magnetic Resonance Hyperthermia

The Effect of Strain Rate on the Microstructure and Mechanical Properties of Q&P 980 Steel