Top

The International Journal of Advanced Manufacturing Technology

Published in:

24-02-2024 | Critical Review

Evolution of hot metal gas forming (HMGF) technologies and its applications: a review

Authors: Hamza Blala, Cheng Pengzhi, Zhang Shenglun, Shahrukh Khan

Published in: The International Journal of Advanced Manufacturing Technology | Issue 7-8/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Hot metal gas forming (HMGF) of tubular profiles enables intricate designs for lightweight material production. HMGF showed an immense manufacturing potential, due to the excellent strength and toughness of the formed parts, better material formability, and better dimensional accuracy of the final product. Existing part production methods, such as weld-assembly of stampings and hydroforming, have significant problems in terms of residual tensile stresses, which can affect the formability and negatively affect the performance capability of the structural components. Due to the lack of a detailed review report, the primary focus of this review article is to provide in-depth analysis of recent developments, innovations, and challenges in HMGF while comparing it to existing manufacturing methods. This examination includes different essential aspects, such as the process principle, material applications, deformation mechanisms, process parameter optimization, and microstructure modeling. Additionally, the article explores future research directions and the potential of HMGF in the manufacturing industry. Our review underscores the critical importance of optimizing process parameters and conducting microstructural analysis to meet evolving challenges. Further research on material models and the interplay of microstructural variables is essential for advancing the field and facilitating precise predictions in HMGF processes.

previous article Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites

next article Experimental study of the removal characteristics of C/SiC with different fiber structure arrangements for two-dimensional ultrasound-assisted grinding

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Trân R, Reblitz J, Haase R, Psyk V, Kräusel V, Merklein M (2022) Hydroforming of high-strength aluminum tubes with thermo-mechanical manufacturing processes. Eng Proc 26(1):13. https://doi.org/10.3390/engproc2022026013CrossRef

Chen WJ, Xu Y, Song HW, Zhang SH, Chen SF, Xia LL, Wange Y, Khina BB, Pokrovsky AI (2022) A Novel hydroforming process by combining internal and external pressures for high-strength steel wheel rims. Materials 15(19):6820. https://doi.org/10.3390/ma15196820CrossRef

Lanzerath H, Tuerk M (2015) Lightweight potential of ultra high strength steel tubular body structures. SAE Int J Mater Manuf 8(3):813–822. https://doi.org/10.4271/2015-01-0570CrossRef

Pathade M, Gupta MK, Kumar N, Pathade HP, Wakchaure PB, Gadhave SN, Markad AV (2022) a review on advance materials and techniques used in automobile application. International Research Journal of Modernization in Engineering Technology and Science. https://doi.org/10.56726/IRJMETS30705

Bell C, Corney J, Zuelli N, Savings D (2020) A state of the art review of hydroforming technology: Its applications, research areas, history, and future in manufacturing. Int J Mater Form 13:789–828. https://doi.org/10.1007/s12289-019-01507-1CrossRef

Emadi P, Andilab B, Ravindran C (2022) Engineering lightweight aluminum and magnesium alloys for a sustainable future. J Indian Inst Sci 102(1):405–420. https://doi.org/10.1007/s41745-021-00267-9CrossRef

Zhang W, Xu J (2022) Advanced lightweight materials for automobiles: a review. Mater Des 2022:110994. https://doi.org/10.1016/j.matdes.2022.110994CrossRef

Toros S, Ozturk F, Kacar I (2008) Review of warm forming of aluminum–magnesium alloys. J Mater Process Technol 207(1-3):1–12. https://doi.org/10.1016/j.jmatprotec.2008.03.057CrossRef

Terziakin M (2005) Hot forming system for metal workpieces, in United States Patent 1-15. https://patents.google.com/patent/US7285761

10.

Liu Y, Wu X (2007) A microstructure study on an AZ31 magnesium alloy tube after hot metal gas forming process. J Mater Eng Perform 16:354–359. https://doi.org/10.1007/s11665-007-9062-yCrossRef

11.

Cheng P (2020) Hot metal gas forming and quenching system and process therefor. in United States Patent. https://patents.google.com/patent/US20220168792A1/en?oq=US20220168792A1. Accessed 11 Jan 2023

12.

Wang K, Liu G, Zhao J, Wang J, Yuan S et al (2016) Formability and microstructure evolution for hot gas forming of laser-welded TA15 titanium alloy tubes. Mater Des 91:269–277. https://doi.org/10.1016/j.matdes.2015.11.100CrossRef

13.

Reddy PV, Reddy BV, Ramulu PJ (2020) Evolution of hydroforming technologies and its applications –a review J Adv. Manuf Syst 19(04):737–780. https://doi.org/10.1142/S0219686720500341CrossRef

14.

Hwang YM, Manabe KI (2021) Latest hydroforming technology of metallic tubes and sheets. Metals 11(9):1360. https://doi.org/10.3390/met11091360CrossRef

15.

Abd El Aal MI, Gadallah EA (2022) Parallel tubular channel angular pressing (PTCAP) processing of the Cu-20.7 Zn-2Al tube. Materials 15(4):1469. https://doi.org/10.3390/ma15041469CrossRef

16.

Faraji G, Babaei A, Mashhadi MM, Abrinia K (2012) Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes. Mater Lett 77:82–85. https://doi.org/10.1016/j.matlet.2012.03.007CrossRef

17.

Abd ElAal MI, El-Fahhar HH, Mohamed AY, Gadallah EA (2022) Influence of parallel tubular channel angular pressing (PTCAP) processing on the microstructure evolution and wear characteristics of copper and brass tubes. Mater 15(9):2985. https://doi.org/10.3390/ma15092985CrossRef

18.

Alaie MA, Naeini MK, Hashemi R, Rajabi M, Hosseini A (2023) Fabrication of AA1050/CP-Cu bimetallic tubes using parallel tube-shaped channel angular pressing technique and assessing its mechanical properties and microstructure. Trans Indian Inst Metals 1-12. https://doi.org/10.1007/s12666-023-02897-2

19.

Song HW, Xie W, Zhang SH, Jiang W, Lăzărescu L, Banabic D (2021) Granular media filler assisted push bending method of thin-walled tubes with small bending radius. Int J Mech Sci 198:106365. https://doi.org/10.1016/j.ijmecsci.2021.106365CrossRef

20.

Zhang R, Yin C, Luo X, Wang ZJ (2020) The numerical analysis of the magnetorheological elastomer bulging for sheet metal. Procedia Manuf 50:110–113. https://doi.org/10.1016/j.promfg.2020.08.020CrossRef

21.

Zhang R, Wang ZJ (2022) A new method of determining forming limit diagram for sheet materials by using the magnetorheological elastomer forming process. Int J Adv Manuf Technol 121(9-10):6005–6019. https://doi.org/10.1016/j.jmatprotec.2014.06.020CrossRef

22.

Zhang Y, Lu XD, Su X, Wen B, Du JH (2021) High-temperature and room-temperature compression deformation behavior comparing of GH4169 Alloy. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/1777/1/012068

23.

Elsenheimer D, Groche P (2009) Determination of material properties for hot hydroforming. Prod Eng 3:165–174. https://doi.org/10.1007/s11740-009-0156-2CrossRef

24.

Ki M, Fujita K, Tada K (2010) Experimental and numerical study on warm hydroforming for T-shape joint of AZ31 magnesium alloy. J Chin Soc Mech Eng 31:284–287

25.

Hwang YM, Su YH, Chen BJ (2010) Tube hydroforming of magnesium alloys at elevated temperatures. J Eng Mater Technol 132(3). https://doi.org/10.1115/1.4001833

26.

Lee MG, Korkolis YP, Kim JH (2015) Recent developments in hydroforming technology. Proc Inst Mech Eng B J Eng Manuf 229(4):572–596. https://doi.org/10.1177/09544054145484CrossRef

27.

Jeswiet J, Geiger M, Engel U, Kleiner M, Schikorra M, Duflou J, Neugebauer R, Bariani P, Bruschi S (2008) Metal forming progress since 2000. CIRP J Manuf Sci Technol 1(1):2–17. https://doi.org/10.1016/j.cirpj.2008.06.005CrossRef

28.

Rajaee M, Hosseinipour SJ, Aval HJ (2019) Tearing criterion and process window of hot metal gas forming for AA6063 cylindrical stepped tubes. Int Adv Manuf Technol 101:2609–2620. https://doi.org/10.1007/s00170-018-3052-0CrossRef

29.

Xu Y, Lv XW, Wang Y, Zhang SH, Xie WL, Xia LL, Chen SF (2023) Effect of hot metal gas forming process on formability and microstructure of 6063 aluminum alloy double wave tube. Mater 16(3):1152. https://doi.org/10.3390/ma16031152CrossRef

30.

Paul A, Reuther F, Neumann S, Albert A, Landgrebe D (2017) Process simulation and experimental validation of hot metal gas forming with new press hardening steels. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/896/1/012051

31.

Paul A, Werner M, Trân R, Landgrebe D (2017) Hot metal gas forming of titanium grade 2 bent tubes. In: AIP Conference Proceedings. AIP Publishing LLC. https://doi.org/10.1063/1.5008054CrossRef

32.

Maeno T, Mori KI, Unou C (2012) Hot metal gas forming process for aluminium alloy tubeusing sealing pressure and resistance heating. JSTP 53(612):54–58. https://doi.org/10.9773/sosei.53.54CrossRef

33.

Nasrollahzade M, Hashemi SJ, Naeini HM, Roohi A, Shahabad SI (2020) Investigation of hot metal gas forming process of square parts. JCARME 10(1):125–138. https://doi.org/10.22061/jcarme.2019.3914.1457CrossRef

34.

Dykstra B, Pfaffmann G, Wu X (1999) Hot metal gas forming - the next generation process for manufacturing vehicle structure components. SAE International. 01-3229 https://doi.org/10.4271/1999-01-3229

35.

Kocańda A, Sadłowska H (2008) Automotive component development by means of hydroforming. Arch Civ Mech Eng 8(3):55–72. https://doi.org/10.1016/S1644-9665(12)60163-0CrossRef

36.

Koç M, Altan T (2001) An overall review of the tube hydroforming (THF) technology. J Mater Process Technol 108(3):384–393. https://doi.org/10.1016/S0924-0136(00)00830-XCrossRef

37.

Zarazua JI, Vadillo L, Manga A, Santos M, Gutierrez M, Gonzalez B, Argentero S (2007) Alternative hydroforming process for high strength and stainless steel tubes in the automotive industry. In: in Proc. of the IDDRG 2007 International Conference, pp 275–282

38.

Dang K, Wang K, Chen W, Liu G (2022) Study on fast gas forming with in-die quenching for titanium alloys and the strengthening mechanisms of the components. J Mater Res Technol 18:3916–3932. https://doi.org/10.1016/j.jmrt.2022.04.084CrossRef

39.

Cooperative Research and Production Act of 1993-Auto Body Consortium, INC. Hot Metal Gas Forming.https://casetext.com/federal-register/notice-pursuant-to-the-national-cooperative-research-and-production-act-of-1993-auto-body-consortium-inc-hot-metal-gas-forming-hmgf. Accessed 20 February 2023

40.

Vahala E (2017) Hot Metal Gas Forming. The team and the HMGF program vision. https://docplayer.net/48972085-Hmgf-hot-metal-gas-forming-the-team-and-the-hmgf-program-s-vision-temper-inc-proprietary-all-rights-reserved.html. Accessed 05 January 2023

41.

HEATforming contructed parts (2023) https://www.heatform.com/. Accessed 05 January 2023

42.

Sundgren A, Lindberg M, Berglund G (2001) Method for manufacturing quenched thin-walled metal hollow casing by blow-moulding. https://patents.google.com/patent/US6261392B1/en. Accessed 20 Jan 2023

43.

Kleinschmidt J, Töpker D, Grußmann E, Fritz A (2002) Method and device for the internal pressure molding of a hollow metallic workpiece made of aluminum or an aluminum alloy. https://patents.google.com/patent/DE19928873B4/en

44.

Smatloch C, Lesch A, Toparkus I, Steinbach G, Kleinschmidt J (2004) Method of making an exhaust gas collector. https://patents.google.com/patent/US6687996B2/en?oq=EP1225315A3. Accessed 24 Jan 2023

45.

Hori I, Mizutani K, Maruyama M, Miyanaga K, Kanai Y, Isogai K (2007) Process for producing hollow member. https://patents.google.com/patent/CN1261248C/zh. Accessed 24 Jan 2023

46.

Dörr J, Gomez RG (2011) Internal high-pressure forming. https://patents.google.com/patent/DE102007018395B4/en. Accessed 24 Jan 2023

47.

Kipry K (2010) Method of shaping a metallic hollow member in a shaping tool at increased temperature and under internal pressure. https://patents.google.com/patent/WO2005092534A1/en. Accessed 24 Jan 2023

48.

Diersmann H, Knaup HJ, Gómez RG (2016) Method of manufacturing a tubular structural part. https://patents.google.com/patent/US9248490B2/en. Accessed 26 Jan 2023

49.

Colosseo M, Bassan D (2014) Method for manufacturing a camshaft for an internal combustion engine. https://patents.google.com/patent/EP2907598A1/en. Accessed 26 Jan 2023

50.

Hertell K (2017) Method for producing a hollow component, component and press for producing a hollow component. https://patents.google.com/patent/WO2017186219A1/en. Accessed 26 Jan 2023

51.

Hongdong Z, Guanli L, Shengjie Y (2019) A kind of high temperature gas expansion forming line production system and method. https://patents.google.com/patent/CN107052127B/en. Accessed 28 Jan 2023

52.

Gang L, Shijian Y, Dongjun W (2020) Method of hot gas forming and hear treatment for a ti2alnb – based alloy hollow thin – walled component. https://patents.google.com/patent/CN109926486B/zh?oq=US+10%2c688%2c552+B2. Accessed 3 Feb 2023

53.

Degenkolb L (2020) Method for producing a component made of metal by means of high internal pressure molding. https://patents.google.com/patent/EP3689490A1/en. Accessed 3 Feb 2023

54.

Yamauchi K (2023) Forming Device. https://patents.google.com/patent/CN111712334B/en?oq=CN111712334B. Accessed 15 Feb 2023

55.

Boulin F, Falk C, Olsson B, Selander H (2022) Hot metal gas formed roof rail and method of manufacture thereof. https://patents.google.com/patent/US11389851B2/en. Accessed 15 Feb 2023

56.

Ambriz RR, Jaramillo D (2014) Mechanical behavior of precipitation hardened aluminum alloys welds. Light Metal Alloys Applications:35–59. https://doi.org/10.5772/58418

57.

Zheng K, Zheng JH, He Z, Liu G, Politise DJ, Wang L (2020) Fundamentals, processes and equipment for hot medium pressure forming of light material tubular components. Int J Lightweight Mater Manuf 3(1):1–19. https://doi.org/10.1016/j.ijlmm.2019.10.003CrossRef

58.

Mori K, Patwari A, Maki S (2004) Improvement of formability by oscillation of internal pressure in pulsating hydroforming of tube. CIRP Ann 53(1):215–218. https://doi.org/10.1016/S0007-8506(07)60682-9CrossRef

59.

Mori K, Maeno T, Maki S (2007) Mechanism of improvement of formability in pulsating hydroforming of tubes. Int J Mach Tools Manuf 47(6):978–984. https://doi.org/10.1016/j.ijmachtools.2006.07.006CrossRef

60.

Loh-Mousavi M, Bakhshi-Jooybari M, Morie KI, Hyashi K (2008) Improvement of formability in T-shape hydroforming of tubes by pulsating pressure. Proc Inst Mech Eng B J Eng Manuf 222(9):1139–1146. https://doi.org/10.1243/09544054JEM1143CrossRef

61.

Louh MM, Bakhshi M, Mori K, Maeno T, Farzin M, Hosseinipour SJ (2008) 3-D finite element simulation of pulsating free bulge hydroforming of tubes. Iran J Sci Technol B 32:611–618

62.

Ashrafi A, Khalili K (2016) Investigation on the effects of process parameters in pulsating hydroforming using Taguchi method. Proc Inst Mech Eng, Part B 230(7):1203–1212. https://doi.org/10.1177/0954405415597831CrossRef

63.

Talebi Anaraki A, Loh-Mousavi M, Wang LL (2018) Experimental and numerical investigation of the influence of pulsating pressure on hot tube gas forming using oscillating heating. Int J Adv Manuf Technol 97:3839–3848. https://doi.org/10.1007/s00170-018-2228-yCrossRef

64.

Bach M, Degenkolb L, Reuther F, Psyk V, Mauermann R, Werner M (2019) Parameter measurement and conductive heating during press hardening by hot metal gas forming. IOP Conference Series: Mater Sci Eng. https://doi.org/10.1088/1757-899X/651/1/012083

65.

Wenzel H, Krauss L (2022) AutoForm the decisive push: hot tube forming takes off at SZHF: Salzgitter hydroforming. https://formingworld.com/szhf-hot-tube-forming/. Accessed 26 January 2023

66.

Bach M, Degenkolb L, Reuther F, Psyk V, Demuth R, Werner M (2020) Conductive heating during press hardening by hot metal gas forming for curved complex part geometries. Metals 10(8):1104. https://doi.org/10.3390/met10081104CrossRef

67.

Maeno T, Mori KI, Fujimoto K (2014) Hot gas bulging of sealed aluminium alloy tube using resistance heating. Manuf Rev 1:5. https://doi.org/10.1051/mfreview/2014004CrossRef

68.

Mori K, Maki S, Tanaka Y (2005) Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating. CIRP Ann 54(1):209–212. https://doi.org/10.1016/S0007-8506(07)60085-7CrossRef

69.

Mori K, Saito S, Maki S (2008) Warm and hot punching of ultra high strength steel sheet. CIRP Ann 57(1):321–324. https://doi.org/10.1016/j.cirp.2008.03.125CrossRef

70.

Alimov A, Haase R, Sviridov A (2022) Upset bulging as a preforming operation for hot metal gas forming of 22MnB5 tubes. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing. https://doi.org/10.1088/1757-899X/1238/1/012016CrossRef

71.

Pierschel N, Paul A, Silbermann K, Schieck F, Drossel WG (2013) Theoretical and experimental investigations on press hardening of tubes in hot metal gas forming. in 4th International Conference Hot Sheet Metal Forming of High-Performance Steel CHS2. 9:12.06 https://publica.fraunhofer.de/entities/publication/831f69c6-eebd-4132-bc4e-988aea32431d/details

72.

Jirková H, Jeníčeke S, Kučerová L, Kurka P (2019) High-strength steel components produced by hot metal gas forming. Mater Sci Technol 1161(1):012003. https://doi.org/10.1080/02670836.2019.1576355CrossRef

73.

Winter S, Werner M, Haase R, Psyk V, Fritsch S, Böhme M, Wagner M (2021) Processing Q&P steels by hot-metal gas forming: influence of local cooling rates on the properties and microstructure of a 3rd generation AHSS. J Mater Process Technol 293:117070. https://doi.org/10.1016/j.jmatprotec.2021.117070CrossRef

74.

Talebi-Anaraki A, Maeno T, Matsubara Y, Ikeda R, Mori KI (2022) integration of hot tube gas forming and die quenching of ultra-high strength steel hollow parts using low pressure sealed-air. Materials 15(4):1322. https://doi.org/10.3390/ma15041322CrossRef

75.

Vadillo L, Santos MT, Gutierrez MA, Pérez I, Gonzáleze B, Uthaisangsuk V (2007) Simulation and experimental results of the hot metal gas forming technology for high strength steel and stainless steel tubes forming. AIP Conference Proceedings American Institute of Physics Vol. 908, No. 1, pp. 1199-1204 https://doi.org/10.1063/1.2740973CrossRef

76.

Mosel A, Lambarri J, Degenkolb L, Reuther F, Luis Hinojo J, Rößiger J et al (2018) Novel process chain for hot metal gas forming of ferritic stainless steel 1.4509. In: AIP Conference Proceedings. AIP Publishing LLC. https://doi.org/10.1063/1.5035045CrossRef

77.

Reuther F, Mosel A, Freytag P, Lambarri J, Degenkolb L et al (2019) Numerical and experimental investigations for hot metal gas forming of stainless steel X2CrTiNb18. Procedia Manuf 27:112–117. https://doi.org/10.1016/j.promfg.2018.12.052CrossRef

78.

Lee G, Go GY, Lee HC, Kim DO, Lee YK, Kim JS, Song JH (2017) Study on an aluminum modified alloy and manufacturing conditions for hot metal gas forming. Trans Mater Process 26(4):222–227. https://doi.org/10.5228/KSTP.2017.26.4.222CrossRef

79.

Michieletto F, Ghiotti A, Bruschi S (2015) Formability of AA6060 tubes in hot metal gas forming at high temperatures. Key Eng Mater Trans Tech Publ. https://doi.org/10.4028/www.scientific.net/KEM.639.49

80.

He ZB, Fan XB, Shao F, Zheng KL, Wang ZB, Yuan SJ (2012) Formability and microstructure of AA6061 Al alloy tube for hot metal gas forming at elevated temperature. Trans Nonferrous Met Soc 22:364–369. https://doi.org/10.1016/S1003-6326(12)61732-4CrossRef

81.

Shahbazi-Karami J, Payganeh G (2017) Investigation of fluid flow and heat transfer in tube hot metal gas forming process. J Computational Appl Res in Mech Eng (JCARME) 7(1):47–56. https://doi.org/10.22061/jcarme.2017.647CrossRef

82.

Rajaee M, Hosseinipour SJ, Jamshidi Aval H (2019) Impact of loading rate in hot tube gas forming of aa6063. ADMT J 12(1):59–66 https://admt.isfahan.iau.ir/article_668332.html

83.

Rajaee M, Hosseinipour SJ, Jamshidi Aval H (2019) Optimization of hot metal gas forming by taguchi method for production step-tubes from aa6063. AUT J Mech Eng 3(1):107–112. https://doi.org/10.22060/AJME.2018.14283.5719CrossRef

84.

Talebi-Anaraki A, Chougan M, Loh-Mousavi M, Maeno T (2020) Hot gas forming of aluminum alloy tubes using flame heating. J Manuf Mater Process 4(2):56. https://doi.org/10.3390/jmmp4020056CrossRef

85.

Dong G, Zhao C, Peng Y, Li Y (2015) Hot granules medium pressure forming process of AA7075 conical parts. Chin J Mech Eng 28(3):580–591. https://doi.org/10.3901/CJME.2015.0217.019CrossRef

86.

Kargar-Pishbijari H, Hosseinipour SJ, Aval HJ (2020) A novel method for manufacturing microchannels of metallic bipolar plate fuel cell by the hot metal gas forming process. J Manuf Process 55:268–275. https://doi.org/10.1016/j.jmapro.2020.04.040CrossRef

87.

Esmaeili S, Hosseinipour S, Shamsi-Sarband A (2021) Numerical analyses of manufacturing of an AA8111 pin-shaped bipolar plate by hot metal gas forming. Int J Eng 34(8):1994–2001. https://doi.org/10.5829/IJE.2021.34.08B.20CrossRef

88.

Esmaeili S, Hosseinipour SJ (2019) Experimental investigation of forming metallic bipolar plates by hot metal gas forming (HMGF). SN Appl Sci 1:1–10. https://doi.org/10.1007/s42452-019-0202-4CrossRef

89.

Wu Y, Liu G, Wang K, Liu Z, Yuan S (2017) The deformation and microstructure of Ti-3Al-2.5 V tubular component for non-uniform temperature hot gas forming. Int J Adv Manuf Technol 88:2143–2152. https://doi.org/10.1007/s00170-016-8927-3CrossRef

90.

Trân R, Reuther F, Winter S, Psyk V (2020) Process development for a superplastic hot tube gas forming process of titanium (Ti-3Al-2.5V) Hollow profiles. Metals 10(9):1150. https://doi.org/10.3390/met10091150CrossRef

91.

Liu G, Dang K, Wang K, Zhao J (2020) Progress on rapid hot gas forming of titanium alloys: Mechanism, modelling, innovations and applications. Procedia Manuf 50:265–270. https://doi.org/10.1016/j.promfg.2020.08.049CrossRef

92.

Zb H, Teng BG, Che CY, Wang ZB, Zheng KL, Yuan SJ (2012) Mechanical properties and formability of TA2 extruded tube for hot metal gas forming at elevated temperature. Trans Nonferrous Metals Soc China 22:479–484. https://doi.org/10.1016/S1003-6326(12)61749-XCrossRef

93.

Roohi AH, Hashemi SJ, Allahyari M (2020) Hot metal gas forming of closed-cell aluminum foam sandwich panels. Trans Indian Inst Met 73(9):2231–2238. https://doi.org/10.1007/s12666-020-02027-2CrossRef

94.

Zhou J, Wan X, Li Y (2015) Advanced aluminium products and manufacturing technologies applied on vehicles presented at the EuroCarBody conference. Mater Today: Proc 2(10):5015–5022. https://doi.org/10.1016/j.matpr.2015.10.091CrossRef

95.

Hirsch J (2014) Recent development in aluminium for automotive applications. Trans Nonferrous Metals Soc China 24(7):1995–2002. https://doi.org/10.1016/S1003-6326(14)63305-7CrossRef

96.

Interlaken Technology Parts Production. 2023. https://interlaken.com/. Accessed 13 march 2023

97.

Masek B, Vorel I, Opatová K, Kurka P, Hahn F, Mahn U (2015) Production of high strength hollow shafts using tool hardening and QP process. In: MATEC Web of Conferences, vol 21. EDP Sciences, p 06009. https://doi.org/10.1051/matecconf/20152106009CrossRef

98.

Bardelcik A, Vowles CJ, Worswick MJ (2018) A mechanical, microstructural, and damage study of various tailor hot stamped material conditions consisting of martensite, bainite, ferrite, and pearlite. Metall Mater Trans A 49:1102–1120. https://doi.org/10.1007/s11661-018-4471-0CrossRef

99.

Han X, Zhong Y, Yang K, Cui Z, Jun C (2014) Application of hot stamping process by integrating quenching & partitioning heat treatment to improve mechanical properties. Procedia Eng 81:1737–1743. https://doi.org/10.1016/j.proeng.2014.10.223CrossRef

100.

Seo EJ, Cho L, De Cooman BC (2014) Application of quenching and partitioning (Q&P) processing to press hardening steel. Metall Mater Trans A 45:4022–4037. https://doi.org/10.1007/s11661-014-2316-zCrossRef

101.

Karbasian H, Tekkaya AE (2010) A review on hot stamping. J Mater Process Technol 210(15):2103–2118. https://doi.org/10.1016/j.jmatprotec.2010.07.019CrossRef

102.

Blanco D, María Rubio E, María Lorente-Pedreille R (2022) Ana Sáenz-Nuñoe M (2022) Sustainable processes in aluminium, magnesium, and titanium alloys applied to the transport sector: a review. Metals 12(1):9. https://doi.org/10.3390/met12010009CrossRef

103.

Siemers C, Haase F (2023) Titanium: From ore extraction and processing to its applications in the transportation industry. In: Proceedings of the 61st Conference of Metallurgists, COM 2022. Springer. https://doi.org/10.1007/978-3-031-17425-4_41CrossRef

104.

Novotny S, Geiger M (2003) Process design for hydroforming of lightweight metal sheets at elevated temperatures. J Mater Process Technol 138(1-3):594–599. https://doi.org/10.1016/S0924-0136(03)00042-6CrossRef

105.

Liu G, Wang K, He B, Huang MX, Yuane S (2015) Mechanism of saturated flow stress during hot tensile deformation of a TA15 Ti alloy. Mater Des 86:146–151. https://doi.org/10.1016/j.matdes.2015.07.100CrossRef

106.

Wang K, Liu G, Huang K, Politis DJ, Wang L (2017) Effect of recrystallization on hot deformation mechanism of TA15 titanium alloy under uniaxial tension and biaxial gas bulging conditions. Mater Sci Eng A 708:149–158. https://doi.org/10.1016/j.msea.2017.09.128CrossRef

107.

Martin S, Wolf S, Martin U, Krüger L, Rafaja D (2016) Deformation mechanisms in austenitic TRIP/TWIP steel as a function of temperature. Metall Mater Trans A 47:49–58. https://doi.org/10.1007/s11661-014-2684-4CrossRef

108.

Fan X, He Z, Yuan S, Zheng K (2013) Experimental investigation on hot forming–quenching integrated process of 6A02 aluminum alloy sheet. Mater Sci Eng 154–160. https://doi.org/10.1016/j.msea.2013.02.058

109.

Wang L, Strangwood M, Balint D, Lin J, Dean TA (2011) Formability and failure mechanisms of AA2024 under hot forming conditions. Mater Sci Eng A 528(6):2648–2656. https://doi.org/10.1016/j.msea.2010.11.084CrossRef

110.

Smith PE, Fang QT, Wu X (2003) On hot metal gas forming process. ASME Int Mech Eng Congress Expo 37092:143. https://doi.org/10.1115/IMECE2003-43623CrossRef

111.

Su L, Zhang C, Wang Z, Mi Z (2017) Finite element simulation of electromagnetic induction heating in hot metal gas forming. Mater Rev 31(24):182–177. https://doi.org/10.11896/j.issn.1005-023X.2017.024.036CrossRef

112.

Porter DA, Easterling KE, Sherif MY (2009) Phase transformations in metals and alloys. CRC press, p 578. https://doi.org/10.1201/9781003011804CrossRef

113.

Vadasz P, Vadasz A (2002) The neoclassical theory of population dynamics in spatially homogeneous environments.(I) Derivation of universal laws and monotonic growth. Phys A: Stat Mech Appl 309(3-4):329–359. https://doi.org/10.1016/S0378-4371(02)00586-1MathSciNetCrossRef

114.

Garrett R, Lin J, Dean T (2005) An investigation of the effects of solution heat treatment on mechanical properties for AA 6xxx alloys: experimentation and modelling. Int J Plast 21(8):1640–1657. https://doi.org/10.1016/j.ijplas.2004.11.002CrossRef

115.

Sandström R, Lagneborg R (1975) A model for hot working occurring by recrystallization. Acta Metall 23(3):387–398. https://doi.org/10.1016/0001-6160(75)90132-7CrossRef

116.

Estrin Y (1998) Dislocation theory based constitutive modelling: foundations and applications. J Mater Process Technol 80:33–39. https://doi.org/10.1016/S0924-0136(98)00208-8CrossRef

117.

Lin J, Dean T (2005) Modelling of microstructure evolution in hot forming using unified constitutive equations. J Mater Process Technol 167(2-3):354–362. https://doi.org/10.1016/j.jmatprotec.2005.06.026CrossRef

118.

Humphreys F (1999) A new analysis of recovery, recrystallisation, and grain growth. Mater Sci Technol 15(1):37–44. https://doi.org/10.1179/026708399773002791MathSciNetCrossRef

119.

Sakai T, Jonas JJ (1984) Overview no. 35 dynamic recrystallization: mechanical and microstructural considerations. Acta Metall 32(2):189–209. https://doi.org/10.1016/0001-6160(84)90049-XCrossRef

120.

Cheong B, Lin J, Ball A (2000) Modelling of the hardening characteristics for superplastic materials. J Strain Anal Eng Des 35(3):149–157. https://doi.org/10.1243/0309324001514314CrossRef

121.

Sellars C (1990) Modelling microstructural development during hot rolling. Mater Sci Technol 6(11):1072–1081. https://doi.org/10.1179/mst.1990.6.11.1072CrossRef

Title: Evolution of hot metal gas forming (HMGF) technologies and its applications: a review
Authors: Hamza Blala
Cheng Pengzhi
Zhang Shenglun
Shahrukh Khan
Publication date: 24-02-2024
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 7-8/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-024-13289-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7-8/2024

Unveiling empirical correlation between electrical and thermal conductivities of medium porosity open-cell porous aluminium fabricated by replication casting method

Improvement of ultrasonic cavitation and pumping effect in microhole EDM

Cross-scale identification method for friction damage on the tool flank of high-feed milling cutter

Study on coarse grain refinement of Ti-6554 billet in hot extrusion process

Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy

Study on the injection wear behavior and contact characteristics of SiC and Al2O3 particles during the abrasive jet machining of Nickel 200

Premium Partners