nach oben

Physics of Metals and Metallography

Erschienen in:

29.12.2023 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Hierarchical Heterogeneity in Bulk Metallic Glasses Rejuvenated by Cryogenic Thermal Cycling

verfasst von: Yihao Wang, Liqiao Yue, Gongji Yang, Mingqin Xu, Jiaojiao Yi

Erschienen in: Physics of Metals and Metallography | Ausgabe 13/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The structural homogeneity of bulk metallic glasses rejuvenated by cryogenic-thermal cycling is discussed and bifurcated into two hierarchies: one can be termed as inhomogeneity with a size similar to shear transformation zones, while another is homogeneity in the magnitude of around the affected zone of nanoindentations. The hierarchical structural characteristics reflect the reduction in size, the increase in number, and the uniformity in spatial distribution, of the soft regions. The reduction in size explains the non-sacrificing or even enhanced strength, and the increased number and homogenous distribution facilitate the enhancement of plasticity for bulk metallic glasses rejuvenated using cryogenic-thermal cycling. This observed difference in homogeneity originates from the non-affine thermal strain in the intrinsically inhomogeneous bulk metallic glasses.

Vorheriger Artikel Effect of Phase Formation on Mechanical Properties of the Joint AA6061 to AA2024 by TLP

Nächster Artikel Effect of Mg Content Change on the Production of Closed-Cell Aluminum Alloy Foam by Selective Laser Melting

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. R. Yavari, J. J. Lewandowski, and J. Eckert, “Mechanical properties of bulk metallic glasses,” MRS Bull. 32, 635–638 (2007). https://doi.org/10.1557/mrs2007.125CrossRef

Q. Wang, Y. Yang, H. Jiang, C. T. Liu, H. H. Ruan, and J. Lu, “Superior tensile ductility in bulk metallic glass with gradient amorphous structure,” Sci. Rep. 4, 4757 (2014). https://doi.org/10.1038/srep04757ADSCrossRefPubMedPubMedCentral

P. F. Guan, B. Wang, Y. C. Wu, S. Zhang, B. S. Shang, Y. C. Hu, R. Su, and Q. Liu, “Heterogeneity: The soul of metallic glasses,” Acta. Phys. Sin. 66, 176112 (2017).CrossRef

J. J. Yi, L. T. Kong, M. Ferry, C. G. Tang, G. Sha, and J. F. Li, “Origin of the separated α-Al nanocrystallization with Si added to Al₈₆Ni₉La₅ amorphous alloy,” Mater. Charact. 178, 111199 (2021). https://doi.org/10.1016/j.matchar.2021.111199CrossRef

A. Slipenyuk and J. Eckert, “Correlation between enthalpy change and free volume reduction during structural relaxation of Zr₅₅Cu₃₀Al₁₀Ni₅ metallic glass,” Scr. Mater. 50, 39–44 (2004). https://doi.org/10.1016/j.scriptamat.2003.09.038CrossRef

J. Yi, W. Xu, X. Xiong, L. Kong, M. Ferry, and J. Li, “Glass-forming ability and crystallization behavior of Al₈₆Ni₉La₅ metallic glass with Si addition,” Adv. Eng. Mater. 18, 972–977 (2016). https://doi.org/10.1002/adem.201500354CrossRef

Z. Z. Yang, L. Zhu, L. X. Ye, X. Gao, S. S. Jiang, H. Yang, and Y. G. Wang, “Nanoscale structural heterogeneity perspective on the improved magnetic properties during relaxation in a Fe-based metallic glass,” J. Non-Cryst. Solids 571, 121078 (2021). https://doi.org/10.1016/j.jnoncrysol.2021.121078CrossRef

D. Pan, Y. Yokoyama, T. Fujita, Y. H. Liu, S. Kohara, A. Inoue, and M. Chen, “Correlation between structural relaxation and shear transformation zone volume of a bulk metallic glass,” Appl. Phys. Lett. 95, 141919 (2009). https://doi.org/10.1063/1.3246151ADSCrossRef

J. S. Gu and H. F. Bo, “Influence of structural relaxation on compressive plasticity of Zr_64.13Cu_15.75Ni_10.12Al₁₀ bulk metallic glass,” Adv. Mater. Res. 910, 48–52 (2014). https://www.scientific.net/amr.910.48

10.

M. Song, Ya.-Q. Li, Zh.-G. Wu, and Yu.-H. He, “The effect of annealing on the mechanical properties of a ZrAlNiCu metallic glass,” J. Non-Cryst. Solids 357, 1239–1241 (2011). https://doi.org/10.1016/j.jnoncrysol.2010.09.024ADSCrossRef

11.

R. Wei, S. Yang, Y. Chang, Y. F. Li, C. J. Zhang, and L. He, “Mechanical property degradation of a CuZr-based bulk metallic glass composite induced by sub-Tg annealing,” Mater. Des. 56, 128–138 (2014). https://doi.org/10.1016/j.matdes.2013.11.001CrossRef

12.

S. V. Ketov, Y. H. Sun, S. Nachum, Z. Lu, A. Checchi, A. R. Beraldin, H. Y. Bai, W. H. Wang, D. V. Louzguine-Luzgin, M. A. Carpenter, and A. L. Greer, “Rejuvenation of metallic glasses by non-affine thermal strain,” Nature 524, 200–203 (2015). https://doi.org/10.1038/nature14674ADSCrossRefPubMed

13.

W. Guo, R. Yamada, and J. Saida, “Rejuvenation and plasticization of metallic glass by deep cryogenic cycling treatment,” Intermetallics 93, 141–147 (2018). https://doi.org/10.1016/j.intermet.2017.11.015CrossRef

14.

C. Tang, J. Yi, W. Xu, and M. Ferry, “Temperature rise in shear bands in a simulated metallic glass,” Phys. Rev. B 98, 224203 (2018). https://doi.org/10.1103/physrevb.98.224203ADSCrossRef

15.

L. Zhang, T. Wang, Q. Hou, Q. Hao, and J. Qiao, “Deformation-induced microstructural heterogeneity and rejuvenation in a Zr-based bulk metallic glass,” J. Non-Cryst. Solids 574, 121148 (2021). https://doi.org/10.1016/j.jnoncrysol.2021.121148CrossRef

16.

S. J. Kang, Q. P. Cao, J. Liu, Y. Tang, X. D. Wang, D. X. Zhang, I. S. Ahn, A. Caron, and J. Z. Jiang, “Intermediate structural state for maximizing the rejuvenation effect in metallic glass via thermo-cycling treatment,” J. Alloys Compd. 795, 493–500 (2019). https://doi.org/10.1016/j.jallcom.2019.05.026CrossRef

17.

L. Y. Chen, A. D. Setyawan, H. Kato, A. Inoue, G. Q. Zhang, J. Saida, X. D. Wang, Q. P. Cao, and J. Z. Jiang, “Free-volume-induced enhancement of plasticity in a monolithic bulk metallic glass at room temperature,” Scr. Mater. 59, 75–78 (2008). https://doi.org/10.1016/j.scriptamat.2008.02.025CrossRef

18.

X. L. Bian, D. Zhao, J. T. Kim, D. Şopu, G. Wang, R. Pippan, and J. Eckert, “Controlling the distribution of structural heterogeneities in severely deformed metallic glass,” Mater. Sci. Eng., A 752, 36–42 (2019). https://doi.org/10.1016/j.msea.2019.02.092CrossRef

19.

M. Samavatian, R. Gholamipour, A. A. Amadeh, and S. Mirdamadi, “Correlation between plasticity and atomic structure evolution of a rejuvenated bulk metallic glass,” Metall. Mater. Trans. A 50, 4743–4749 (2019). https://doi.org/10.1007/s11661-019-05391-xCrossRef

20.

C. M. Meylan, F. Papparotto, S. Nachum, J. Orava, M. Miglierini, V. Basykh, J. Ferenc, T. Kulik, and A. L. Greer, “Stimulation of shear-transformation zones in metallic glasses by cryogenic thermal cycling,” J. Non-Cryst. Solids 548, 120299 (2020). https://doi.org/10.1016/j.jnoncrysol.2020.120299CrossRef

21.

J.-L. Gu, H.-W. Luan, Sh.-F. Zhao, H.-T. Bu, J.-J. Si, Ya. Shao, and K.-F. Yao, “Unique energy-storage behavior related to structural heterogeneity in high-entropy metallic glass,” Mater. Sci. Eng., A 786, 139417 (2020). https://doi.org/10.1016/j.msea.2020.139417CrossRef

22.

T. Hufnagel, “Cryogenic rejuvenation,” Nat. Mater. 14, 867–868 (2015). https://doi.org/10.1038/nmat4394ADSCrossRefPubMed

23.

X. L. Bian, G. Wang, H. C. Chen, L. Yan, J. G. Wang, Q. Wang, P. F. Hu, J. L. Ren, K. C. Chan, N. Zheng, A. Teresiak, Y. L. Gao, Q. J. Zhai, J. Eckert, J. Beadsworth, K. A. Dahmen, and P. K. Liaw, “Manipulation of free volumes in a metallic glass through Xe-ion irradiation,” Acta Mater. 106, 66–77 (2016). https://doi.org/10.1016/j.actamat.2016.01.002ADSCrossRef

24.

Q. Jia, Q. Zhou, Yu. Ren, Yi. Du, X. Zhao, X.‑Z. Wang, H. Wang, B. D. Beake, and F. Zhou, “Tribological characteristics of Ti-based bulk metallic glass via deep cryogenic-cycling treatment,” Mater. Charact. 179, 111356 (2021). https://doi.org/10.1016/j.matchar.2021.111356CrossRef

25.

J. W. Lv, F. L. Wang, D. W. Yin, S. Zhang, Z. Q. Cai, Z. L. Shi, M. Z. Ma, and X. Y. Zhang, “Effect of deep cryogenic cycling treatment on the microstructure and mechanical properties of Ti-based bulk metallic glass,” J. Alloys Compd. 887, 161386 (2021). https://doi.org/10.1016/j.jallcom.2021.161386CrossRef

26.

S. Di, Q. Wang, J. Zhou, Yi. Shen, J. Li, M. Zhu, K. Yin, Q. Zeng, L. Sun, and B. Shen, “Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling,” Scr. Mater. 187, 13–18 (2020). https://doi.org/10.1016/j.scriptamat.2020.05.059CrossRef

Titel: Hierarchical Heterogeneity in Bulk Metallic Glasses Rejuvenated by Cryogenic Thermal Cycling
verfasst von: Yihao Wang
Liqiao Yue
Gongji Yang
Mingqin Xu
Jiaojiao Yi
Publikationsdatum: 29.12.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 13/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22601378

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 13/2023

Effect of Nb Doping on Thermoelectric Properties of TiNiSn Half-Heusler Alloy Prepared by Microwave Method

Wear Performances of Hypereutectoid P/M Steels Subjected to Different Heat Treatments

Study on the Micro-Texture and Anisotropy of a Cold-Rolled and Intercritically Annealed DP800 Steel

Rate-Dependent Compressive Behaviour of SiC−B4C−Al Hybrid Composites

Microstructure and Properties of Cu–Ti Alloys Prepared by Aluminothermic Reaction and Subsequent Rolling

Electrochemical Properties of TiAl-Based Alloys