Anzeige
Erschienen in:
2024 | OriginalPaper | Buchkapitel
Influence of Blank Holder Force and Limiting Drawing Ratio on Fracture Height During Cup—Drawing Process of SECC Sheet Metal
verfasst von : Thi-Bich Mac, Ngoc-Quyet Ly, The-Thanh Luyen
Erschienen in: Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)
Verlag: Springer Nature Switzerland
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
This paper analyzes the influence of blank holder force (FBH) and limiting drawing ratio (Mt) when drawing cylindrical parts from electrolytic zinc-coated steel blank (SECC) with a thickness of 0.6 mm. Firstly, initial survey experiments were performed to determine the study limits of the input parameters. Then the influence of the FBH and the Mt on the fracture height (H) is evaluated. When the Mt is fixed and FBH increases from 8 to 12 kN, the H decreases. Meanwhile, if the Mt is fixed and the FBH is increased from 1.94 to 2.09, the H increases, but when continuing to increase the Mt to 2.24, the H decreases. Finally, study the simultaneous influence of the FBH and Mt on the H, and the optimal set of technological parameters to achieve the maximum forming height are FBH = 8 kN and Mt = 2.09.