nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

31.07.2021 | ORIGINAL ARTICLE

Plastic behavior-dependent weldability of heat-treatable aluminum alloys in friction stir welding

verfasst von: Danilo Ambrosio, Vincent Wagner, Gilles Dessein, Jean-Yves Paris, Khouloud Jlaiel, Olivier Cahuc

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The quality of friction stir welding joints is intimately related to the correct mixing of the stirred material. The material flow is strongly dependent on the plastic behavior of the welded alloy. For this reason, the friction stir weldability depends on the structure, microstructure, and chemical composition of the base material. In this work, in-plane forces and acoustic emission signals were monitored while welding two heat-treatable aluminum alloys. The force evolutions suggested possible continuous and intermittent material flow during friction stir welding depending on the welding parameters. The differences observed in the in-plane forces were corroborated by acoustic emission, confirming the modification in the material flow phenomenology. Therefore, differences observed in aluminum alloys’ friction stir weldability are due to the plastic behavior at high temperature and medium-high strain rate. The higher the deformability of the aluminum alloys, the wider the weldability window in friction stir welding because of continuous material flow in an extended range of process parameters.

Vorheriger Artikel Relationship between pulsed laser energy and fracture mode in multiple-pulse laser shock bulging process

Nächster Artikel A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Thomas WM, Nicholas ED, Needham JC, Murch MG, Templesmith P, Dawes CJ (1995) U.S. Patent No. 5,460,317, October 24

Engler O, Hirsch J (2002) Texture control by thermomechanical processing of AA6xxx Al-Mg-Si sheet alloys for automotive applications - a review. Mater Sci Eng A 336(1-2):249–262. https://doi.org/10.1016/S0921-5093(01)01968-2CrossRef

Ribeiro FC, Scarpin BT, Batalha GF (2016) Experimental and numerical modelling and simulation of the creep age forming of aeronautic panels AA7XXX aluminium alloy. Adv Mater Process Technol 2 (1):1–20. https://doi.org/10.1080/2374068X.2016.1147764

Cavaliere P, Squillace A, Panella F (2008) Effect of welding parameters on mechanical and microstructural properties of AA6082 joints produced by friction stir welding. J Mater Process Technol 200(1-3):364–372. https://doi.org/10.1016/j.jmatprotec.2007.09.050CrossRef

Leitão C, Louro R, Rodrigues DM (2012) Analysis of high temperature plastic behaviour and its relation with weldability in friction stir welding for aluminium alloys AA5083-H111 and AA6082-T6. Mater Des 37:402–409. https://doi.org/10.1016/j.matdes.2012.01.031CrossRef

Ramulu PJ, Narayanan RG, Kailas SV, Reddy J (2013) Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets. Int J Adv Manuf Technol 65(9-12):1515–1528. https://doi.org/10.1007/s00170-012-4276-zCrossRef

Forcellese A, Simoncini M, Casalino G (2017) Influence of process parameters on the vertical forces generated during friction stir welding of AA6082-T6 and on the mechanical properties of the joints. Metals 7 (9):1–13. https://doi.org/10.3390/met7090350CrossRef

Lambiase F, Paoletti A, Di Ilio A (2018) Forces and temperature variation during friction stir welding of aluminum alloy AA6082-T6. Int J Adv Manuf Technol 99(1-4):337–346. https://doi.org/10.1007/s00170-018-2524-6CrossRef

Azimzadegan T, Serajzadeh S (2010) An investigation into microstructures and mechanical properties of AA7075-T6 during friction stir welding at relatively high rotational speeds. J Mater Eng Perform 19 (9):1256–1263. https://doi.org/10.1007/s11665-010-9625-1CrossRef

10.

Bahemmat P, Besharati MK, Haghpanahi M, Rahbari A, Salekrostam R (2010) Mechanical, micro-, and macrostructural analysis of AA7075-T6 fabricated by friction stir butt welding with different rotational speeds and tool pin profiles. Proc Inst Mech Eng B J Eng Manuf 224(3):419–433. https://doi.org/10.1243/09544054JEM1554CrossRef

11.

Gemme F, Verreman Y, Dubourg L, Wanjara P (2011) Effect of welding parameters on microstructure and mechanical properties of AA7075-T6 friction stir welded joints. pp 877–886. https://doi.org/10.1111/j.1460-2695.2011.01580.x

12.

Rajakumar S, Muralidharan C, Balasubramanian V (2011) Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints. Mater Des 32(2):535–549. https://doi.org/10.1016/j.matdes.2010.08.025CrossRef

13.

Ipekoǧlu G, Kiral BG, Erim S, Çam G (2012) Investigation of the effect of temper condition on the friction-stir weldability of AA7075 Al-alloy plates. Mater Tehnol 46(6):627–632

14.

Zhang C, Huang G, Cao Y, Zhu Y, Liu Q (2019) On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed. J Manuf Process 37(December 2018):470–487. https://doi.org/10.1016/j.jmapro.2018.12.014CrossRef

15.

Ambrosio D, Wagner V, Garnier C, Jacquin D, Tongne A, Fazzini M, Dessein G (2020) Influence of welding parameters on the microstructure, thermal fields and defect formation in AA7075-T6 friction stir welds. Weld World 64(5):773–784. https://doi.org/10.1007/s40194-020-00869-4CrossRef

16.

Ambrosio D, Garnier C, Wagner V, Aldanondo E, Dessein G, Cahuc O (2020) Relationships between welding parameters, aging conditions, and weld properties in AA7075-T6 friction stir welds. Int J Adv Manuf Technol 111(5-6):1333–1350. https://doi.org/10.1007/s00170-020-06184-yCrossRef

17.

Long T, Tang W, Reynolds AP (2007) Process response parameter relationships in aluminium alloy friction stir welds. Sci Technol Weld Join 12(4):311–317. https://doi.org/10.1179/174329307X197566CrossRef

18.

Astarita A, Squillace A, Carrino L (2014) Experimental study of the forces acting on the tool in the friction-stir welding of AA 2024 T3 sheets. J Mater Eng Perform 23(10):3754–3761. https://doi.org/10.1007/s11665-014-1140-3CrossRef

19.

Doude H, Schneider J, Patton B, Stafford S, Waters T, Varner C (2015) Optimizing weld quality of a friction stir welded aluminum alloy. J Mater Process Technol 222:188–196. https://doi.org/10.1016/j.jmatprotec.2015.01.019CrossRef

20.

Shrivastava A, Zinn M, Duffie NA, Ferrier NJ, Smith CB, Pfefferkorn FE (2017) Force measurement-based discontinuity detection during friction stir welding. J Manuf Process 26:113–121. https://doi.org/10.1016/j.jmapro.2017.01.007CrossRef

21.

Franke D, Rudraraju S, Zinn M, Pfefferkorn FE (2020) Understanding process force transients with application towards defect detection during friction stir welding of aluminum alloys. J Manuf Process 54(November 2019):251–261. https://doi.org/10.1016/j.jmapro.2020.03.003CrossRef

22.

Chen C, Kovacevic R, Jandgric D (2003) Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum. Int J Mach Tools Manuf 43(13):1383–1390. https://doi.org/10.1016/S0890-6955(03)00130-5CrossRef

23.

Soundararajan V, Atharifar H, Kovacevic R (2006) Monitoring and processing the acoustic emission signals from the friction-stir-welding process. Proc Inst Mech Eng B J Eng Manuf 220(10):1673–1685. https://doi.org/10.1243/09544054JEM586CrossRef

24.

Rajashekar R, Rajaprakash BM (2016) Development of a model for friction stir weld quality assessment using machine vision and acoustic emission techniques. J Mater Process Technol 229:265–274. https://doi.org/10.1016/j.jmatprotec.2015.09.030CrossRef

25.

Metals Handbook (1990) Vol.2 - properties and selection: nonferrous alloys and special-purpose materials, 10th edn. ASM International, Russell

26.

Wang PL, Jiang HT, Zhang RJ, Huang SY (2016) Study of Hot Deformation Behavior of 6082 Aluminum Alloy. Mater Sci Forum 877:340–346. https://doi.org/10.4028/www.scientific.net/msf.877.340CrossRef

27.

Cadoni E, Dotta M, Forni D, Kaufmann H (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Struct Integr 2:986–993. https://doi.org/10.1016/j.prostr.2016.06.126CrossRef

28.

Ulysse P (2002) Three-dimensional modeling of the friction stir-welding process. Int J Mach Tools Manuf 42(14):1549–1557. https://doi.org/10.1016/S0890-6955(02)00114-1CrossRef

29.

Mijajlović MM, Pavlović NT, Jovanović SV, Jovanović DS, Milčić MD (2013) Experimental studies of parameters affecting the heat generation in friction stir welding process. Therm Sci 16 (SUPPL.2):351–362. https://doi.org/10.2298/TSCI120430174M

30.

Schmidt H, Hattel J, Wert J (2004) An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci Eng 12(1):143–157. https://doi.org/10.1088/0965-0393/12/1/013CrossRef

31.

Khandkar MZH, Khan JA, Reynolds AP (2003) Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Join. https://doi.org/10.1179/136217103225010943

32.

Fehrenbacher A, Duffie NA, Ferrier NJ, Pfefferkorn FE, Zinn MR (2014) Effects of tool-workpiece interface temperature on weld quality and quality improvements through temperature control in friction stir welding. Int J Adv Manuf Technol 71(1-4):165–179. https://doi.org/10.1007/s00170-013-5364-4CrossRef

33.

Jlaiel K, Yahiaoui M, Paris JY, Denape J (2020) Tribolumen: A tribometer for a correlation between ae signals and observation of tribological process in real-time-application to a dry steel/glass reciprocating sliding contact. Lubricants 8(4). https://doi.org/10.3390/LUBRICANTS8040047

34.

Yahiaoui M, Chabert F, Paris JY, Nassiet V, Denape J (2019) Friction, acoustic emission, and wear mechanisms of a PEKK polymer. Tribol Int 132:154–164. https://doi.org/10.1016/j.triboint.2018.12.020CrossRef

35.

Silva-Magalhães A, De Backer J, Martin J, Bolmsjö G (2019) In-situ temperature measurement in friction stir welding of thick section aluminium alloys. J Manuf Process 39(February):12–17. https://doi.org/10.1016/j.jmapro.2019.02.001CrossRef

36.

Yan JH, Sutton MA, Reynolds AP (2007) Processing and banding in AA2524 and AA2024 friction stir welding. Sci Technol Weld Join 12(5):390–401. https://doi.org/10.1179/174329307X213639CrossRef

37.

Shah LH, Walbridge S, Gerlich A (2019) Tool eccentricity in friction stir welding: a comprehensive review. Sci Technol Weld Join 24(6):566–578. https://doi.org/10.1080/13621718.2019.1573010CrossRef

38.

Zakharov VV (1995) Scientific aspects of deformability of aluminum alloys during extrusion. Adv Perform Mater 2(1):51–65. https://doi.org/10.1007/BF00711651CrossRef

39.

Reza A, Zhou J, Duszczyk J (2011) Microstructural evolution during the homogenization of Al-Zn-Mg aluminum alloys. Recent Trends in Processing and Degradation of Aluminium Alloys. https://doi.org/10.5772/34695

40.

Ngernbamrung S, Suzuki Y, Takatsuji N, Dohda K (2018) Investigation of surface cracking of hot-extruded AA7075 billet. Procedia Manuf 15:217–224. https://doi.org/10.1016/j.promfg.2018.07.212CrossRef

41.

Sigworth GK (1996) Hot tearing of metals. AFS Trans-Am Foundry: 1053–1062. Retrieved from papers3://publication/uuid/ 85386CF4-29C7-4099-94CA-3244BD680230

42.

Stoloff NS (1983) Liquid and solid metal ebrittlement. Atomics of fracture, pp 921–947

43.

Kim YG, Fujii H, Tsumura T, Komazaki T, Nakata K (2006) Three defect types in friction stir welding of aluminum die casting alloy. Mater Sci Eng A 415(1-2):250–254. https://doi.org/10.1016/j.msea.2005.09.072CrossRef

Titel: Plastic behavior-dependent weldability of heat-treatable aluminum alloys in friction stir welding
verfasst von: Danilo Ambrosio
Vincent Wagner
Gilles Dessein
Jean-Yves Paris
Khouloud Jlaiel
Olivier Cahuc
Publikationsdatum: 31.07.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07754-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2021

Customer behaviour–based multi-objective approach for the recovery and remanufacturing of used products: application to smartphone reconditioning process

Optimisation of cutting fluid concentration and operating parameters based on RSM for turning Ti–6Al–4V

Theoretical analysis, finite element modelling, and experimental investigation of manufacturing convoluted spiral tubes through free bending forming technology

Complex product manufacturing and operation and maintenance integration based on digital twin

Numerical analysis of the non-stationary thermal state of the tool in the combined casting and extrusion of aluminum alloy

The ontology-based modeling and evolution of digital twin for assembly workshop

Premium Partner

Marktübersichten