Abstract
This research seeks to solve the problems of vertical curves with a foreslope using a more suitable model than the point mass model. In this regard, investigating the effect of lateral acceleration and yaw and roll moments on safe foreslope in vertical curves on rural highways and the concavity or convexity of vertical curves was defined as the main goal of this research. Finally, by presenting regression modeling, lateral acceleration was modeled as a dependent variable based on vehicle speed, vehicle departure angle, and slope of foreslope as independent variables. It was revealed that a zero longitudinal slope and tangent alignment do not significantly affect the lateral acceleration of passenger cars and cannot be considered a serious threat to their overturning. Also, the departure angle of 10–15 degrees for the truck vehicle causes the vehicle to yaw in place at all speeds. The results of presenting the lateral acceleration model showed that R coefficient for the lateral acceleration model is 0.886, which indicates the appropriate correlation of the model with the data. Also, the results of the model showed that the variables of vehicle speed, departure angle of the vehicle from the road and the slope of the foreslope have a significant impact on the model.
Similar content being viewed by others
References
Abdi A et al (2019a) Analysing the influence of encroachment angle and median parameters on safety of rural highways using vehicle dynamics performance. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing.
Abdi A et al. (2019b) Dynamic modelling of the effects of combined horizontal and vertical curves on side friction factor and lateral acceleration. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing
Abdi Kordani A, Javadi S, Fallah A (2018) The effect of shoulder on safety of highways in horizontal curves: with focus on roll angle. KSCE J Civil Eng 22(8):3153–3161
Anarkooli AJ, Hosseinpour M, Kardar A (2017) Investigation of factors affecting the injury severity of single-vehicle rollover crashes: a random-effects generalized ordered probit model. Accid Anal Prev 106:399–410
Ben-Bassat T, Shinar D (2011) Effect of shoulder width, guardrail and roadway geometry on driver perception and behavior. Accid Anal Prev 43(6):2142–2152
Chen P, Wu J, Li N (2023) A personalized navigation route recommendation strategy based on differential perceptron tracking user’s driving preference. Comput Intell Neurosci 2023
Cronje PH, Els PS (2010) Improving off-road vehicle handling using an active anti-roll bar. J Terrramech 47(3):179–189
Dang W et al (2023) An encoder-decoder fusion battery life prediction method based on Gaussian process regression and improvement. J Energy Storage 59:106469
Dong Y et al (2020) A vision-based two-stage framework for inferring physical properties of the terrain. Appl Sci 10(18):6473
Duan P et al (2020) Distributed energy management in smart grids based on cloud-fog layer architecture considering PHEVs. IEEE Trans Ind Appl
Fang Y et al (2022) On-ramp merging strategies of connected and automated vehicles considering communication delay. IEEE Trans Intell Transp Syst 23(9):15298–15312
Fu Q et al (2022) Experimental study on vibration velocity of piled raft supported embankment and foundation for ballastless high speed railway. Buildings 12(11):1982
Gillespie T (ed) (2021) Fundamentals of vehicle dynamics. SAE international
Grzebieta RH et al. (2007) Rollover crashworthiness: the final frontier for vehicle passive safety. In: Proceedings of the Australasian Road Safety Research, Policing and Education Conference. 2007. Monash University.
Haghir S et al (2021) BIM based decision-support tool for automating design to fabrication process of freeform lattice space structure. Int J Space Struct 36(3):164–179
Han Y, Wang B, Guan T, Tian D, Yang G, Wei W, Chuah JH (2022) Research on road environmental sense method of intelligent vehicle based on tracking check. IEEE Trans Intell Transport Syst 24(1):1261–1275
Hemingway R, Robbins J (2020) Developing a hazard-impact model to support impact-based forecasts and warnings: the vehicle overturning (VOT) Model. Meteorol Appl 27(1):e1819
Hosseinian SM, Gilani VNM (2020) Analysis of factors affecting urban road accidents in rasht metropolis. Eng Trans 1:1–4
Huang Q, Fan H (2010) Optimization modeling of superelevation rates based on operation speed. In: ICCTP 2010: Integrated Transportation Systems: Green, Intelligent, Reliable pp 548–555
Javadi S, I. ّFarzin, and A. Abdi, (2021) Evaluation of the effect of road shoulder characteristics on dynamic parameters affecting on vehicle rollover in the joint of shoulder-roadway in horizontal curves. J Transport Res 18(1):51–62
Jiang S, Zhao C, Zhu Y, Wang C, Du Y (2022) A practical and economical ultra-wideband base station placement approach for indoor autonomous driving systems. J Adv Transport 2022
Kazemtarghi A, Chandwani A, Ishraq N, Mallik A (2022) Active compensation-based harmonic reduction technique to mitigate power quality impacts of EV charging systems. IEEE Trans Transport Electrif 9(1):1629–1640
Kazemtarghi A, et al. (2023) Asymmetric half-frequency modulation in DAB to optimize the conduction and switching losses in EV charging applications. IEEE Trans Transport Electrif
Khordehbinan M, Kaymanesh MR (2020) Chemical analysis and middle-low temperature functional of waste polybutadiene rubber polymer modified bitumen. Pet Sci Technol 38(1):8–17
Konovalova T et al. (2020) Investigation of vehicle rollover accidents. In: Proceedings of the XIII international scientific conference on architecture and construction 2020: commemorating the 90th anniversary of Novosibirsk State University of Architecture and Civil Engineering. Springer
Kordani AA, Molan AM (2015) The effect of combined horizontal curve and longitudinal grade on side friction factors. KSCE J Civ Eng 19(1):303–310
Lew J, Piyabongkarn D, Grogg J (2006) Minimizing dynamic rollover propensity with electronic limited slip differentials. SAE Transactions, pp 1183–1190
Li Z, Kong Y, Jiang C (2023) A transfer double deep Q network based DDoS detection method for internet of vehicles. IEEE Trans Vehic Technol
Lu Y et al (2022) Sliding mode control for overturning prevention and hardware-in-loop experiment of heavy-duty vehicles based on dynamical load transfer ratio prediction. Proc Inst Mech Eng Part k J Multi-Body Dyn 236(1):68–83
Luo C et al (2022) A new conjugate gradient method for moving force identification of vehicle–bridge system. J Vib Eng Technol pp 1–18
Ma X et al (2023) Real-time assessment of asphalt pavement moduli and traffic loads using monitoring data from Built-in Sensors: Optimal sensor placement and identification algorithm. Mech Syst Signal Process 187:109930
Mahpour A (2022) Modeling to identify and prioritize dangerous vertical curve from the perspective of safety and accidents. J Transp Res 19(71):21–30
McLean J et al. (2005) Rollover crashes
Mehrara M, Majdzadeh MA, Ghazanfari A (2016) Determinants of private investment in Iran based on bayesian model of averaging. J Econ Policy 7(14):1–29
Min H et al (2023) A fault diagnosis framework for autonomous vehicles with sensor self-diagnosis. Expert Syst Appl 224:120002
Minaker BP (2019) Fundamentals of vehicle dynamics and modelling: a textbook for engineers with illustrations and examples. John Wiley and Sons
Myers ML (2022) Overturn countermeasures for vehicles: history of the rollbar. Cambridge Scholars Publishing
Najafi Moghaddam Gilani V, Hosseinian SM, Ghasedi M, Nikookar M (2021) Data-driven urban traffic accident analysis and prediction using logit and machine learning-based pattern recognition models. Math Probln Eng 2021:1–11
Nalecz AG, Lu Z, d'Entremont KL (1993) An investigation into dynamic measures of vehicle rollover propensity (No 930831). SAE Technical Paper
NHTSA U (2003) Fatality analysis reporting system (FARS). 2003, National Highway Traffic Safety Administration Washington, DC
Praxl N, Schoenpflug M, Adamec J (2003) Application of human models in vehicle rollover. SAE Transactions pp 637–643
Qu G et al (2018) Modeling of lateral stability of tractor-semitrailer on combined alignments of freeway. Discret Dyn Nat Soc 2018:8438921
Rajabi M et al (2023) The development of BPR models in smart cities using loop detectors and license plate recognition technologies: a case study. J Future Sustain 3(2):75–84
Rastegar RM et al (2022) From evidence to assessment: developing a scenario-based computational design algorithm to support informed decision-making in primary care clinic design workflow. Int J Archit Comput 20(3):567–586
Rezaei S et al (2017) The effect of nano-SiO2 and the styrene butadiene styrene polymer on the high-temperature performance of hot mix asphalt. Pet Sci Technol 35(6):553–560
Rezaei S et al (2020) Fatigue analysis of bitumen modified with composite of nano-SiO2 and styrene butadiene styrene polymer. Frattura Ed Integrità Strutturale 14(53):202–209
Rill G (2011) Road vehicle dynamics: fundamentals and modeling. Crc Press
Sadeghi M, Nikfar M, Rad F (2024) Optimizing warehouse operations for environmental sustainability: a simulation study for reducing carbon emissions and maximizing space utilization. J Future Sustain 4(1):35–44
Samadi M, Jahan N (2019) Determining the effective level of outrigger in preventing collapse of tall buildings by IDA with an alternative damage measure. Eng Struct 191:104–116
Samadi M, Jahan N (2021) Comparative study on the effect of outrigger on seismic response of tall buildings with braced and Wall Core II: determining seismic design parameters. Struct Des Tall Spec Build 30(9):e1855
Seraji H, Tavakkoli-Moghaddam R, Soltani R (2019) A two-stage mathematical model for evacuation planning and relief logistics in a response phase. J Ind Syst Eng 12(1):129–146
Seraji H et al (2022) An integrative location-allocation model for humanitarian logistics with distributive injustice and dissatisfaction under uncertainty. Ann Oper Res 319(1):211–257
Sharf Aldeen A et al (2023) Safety comparison of simple and spiral horizontal curves based on side friction factor dynamic modeling. J Adv Transp 2023:7954346
Shayesteh A et al (2017) Finite element method in statistical analysis of flexible pavement. J Mar Sci Technol 25(2):15
Taghieh A et al (2022) A predictive type-3 fuzzy control for underactuated surface vehicles. Ocean Eng 266:113014
Vahid R, Farnood AF, Mohammadi N (2021) Earthquake damage modeling using cellular automata and fuzzy rule-based models. Arabian J Geosci 14:1–14
Wang X et al (2019) Combined alignment effects on deceleration and acceleration: a driving simulator study. Transport Res Part c: Emerging Technol 104:172–183
Wang H, Zhang X, Jiang S (2022a) A laboratory and field universal estimation method for tire-pavement interaction noise (tpin) based on 3D image technology. Sustainability 14(19):12066
Wang J et al (2022b) Control of time delay force feedback teleoperation system with finite time convergence. Front Neurorobotics 16:877069
Wang X et al (2022c) The impact of the combination equilibrium of horizontal and sag-vertical curves on safety. Int J Transport Sci Technol
Wu X et al (2010) Research on vehicle rollover and control. In: 2010 2nd International Conference on Advanced Computer Control IEEE
Xiao Z et al (2022) Perception task offloading with collaborative computation for autonomous driving. IEEE J Select Areas Commun 41(2):457–473
Xu J et al (2021) The improvement of road driving safety guided by visual inattentional blindness. IEEE Trans Intell Transp Syst 23(6):4972–4981
Xu J et al (2022a) Human-factors-in-driving-loop: driver identification and verification via a deep learning approach using psychological behavioral data. IEEE Trans Intell Transport Syst 24(3):3383–3394
Xu J et al (2022b) The alleviation of perceptual blindness during driving in urban areas guided by saccades recommendation. IEEE Trans Intell Transp Syst 23(9):16386–16396
Xu J, Guo K, Sun PZ (2022c) Driving performance under violations of traffic rules: novice vs experienced drivers. IEEE Trans Intell Vehicl 7(4):908–917
Yao Z, Yoon HS (2021) Hybrid electric vehicle powertrain control based on reinforcement learning. SAE Int J Electrif Vehic 11:165–176
Yuan H, Yang B (2022) System dynamics approach for evaluating the interconnection performance of cross-border transport infrastructure. J Manag Eng 38(3):04022008
Zarei M et al (2022) Evaluation of fracture behaviour of modified warm mix asphalt containing vertical and angular cracks under freeze-thaw damage. Int J Pavement Eng pp 1–17
Zealand TN (2000) Draft state highway geometric design manual. Transit New Zealand
Zhang Z et al (2022) Residual stress of grinding cemented carbide using MoS2 nano-lubricant. Int J Adv Manuf Technol 119(9):5671–5685
Zhang X et al. (2022) Adaptive dynamic surface control with disturbance observers for battery/supercapacitor-based hybrid energy sources in electric vehicles. IEEE Trans Transport Electrif
Ziari H et al. (2023) Laboratory investigation of reclaimed asphalt mixtures containing cyclogen and vacuum bottom rejuvenators. Adv Civil Eng
Funding
In this study, Iranian governmental organizations have not been partners and sponsors, and this study is purely studious. This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Attari, A., Abdi Kordani, A., Habibzadeh, M. et al. Evaluation of the Influence of Overturning Parameters on Run-Off-the-Road Vehicles in Vertical Curves. Iran J Sci Technol Trans Civ Eng 48, 1151–1169 (2024). https://doi.org/10.1007/s40996-023-01220-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40996-023-01220-9