nach oben

Erschienen in:

2018 | Supplement | Buchkapitel

7. Areas of Application of Laser Metal Deposition Process–Part Repair and Remanufacturing

verfasst von : Rasheedat Modupe Mahamood

Erschienen in: Laser Metal Deposition Process of Metals, Alloys, and Composite Materials

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Laser metal deposition process is an important additive manufacturing process with a number of capabilities such as the ability to fabricate three dimensional (3D) part directly from the 3D computer aided design profile of the part; the ability to repair worn out parts of very high value that were not repairable in the past; and the ability to build a new part on an existing part that are metallurgically bonded to the old part. This important capability of the laser metal deposition process (ability to add new part on an existing part) is what has positioned this important additive manufacturing process in product remanufacturing and this is a unique laser metal deposition capability. Product remanufacturing is an important aspect of manufacturing that helped to improve material life cycle and helped to reduce scrap. In this chapter, repair, remanufacturing and surface modification applications areas of laser metal deposition process are presented.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Laser Metal Deposition of Composites and Functionally Graded Materials

Nächstes Kapitel Laser Metal Deposition of Titanium Alloy and Titanium Alloy Composite: Case Studies

Scott J, Gupta N, Wember C, Newsom S, Wohlers T, Caffrey T (2012) Additive manufacturing: status and opportunities. Science and Technology Policy Institute. Available from:https://www.ida.org/stpi/occasionalpapers/papers/AM3D_33012_Final.pdf. Accessed on 11 Jan 2017

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2014) Evolutionary additive manufacturing: an overview. Lasers Eng 27:161–178

Mattheij S (2002) Turbine repairs now possible with laser powder build-up welding technique. Eng Technol 5(4):26–27

Plourde R (2004) Laser-based repair system reclaims high value military components. In: Proceedings of the RTO applied vehicle technology panel (AVT) Specialists’ Meeting, Williamsburg, Virginia

Kamrani AK (2014) Direct laser deposition for re-manufacturing of components. 2014 World Automation Congress (WAC), Waikoloa, HI, pp 1–5. doi:10.1109/WAC.2014.6935640

Gao J, Chen X, Zheng D (2010) Remanufacturing oriented adaptive repair system for worn components. In: Proceedings of responsive manufacturing e Green Manufacturing ICRM, 5th International Conference, Ningbo, China, pp 13e18. doi:10.1049/cp.2010.0406

Bremer C (2000) Adaptive strategies for manufacturing and repair of blades and blisks. In: Proceedings of ASME Turbo Expo 2000: 45th ASME International Gas Turbine & Aeroengine Technical Congress, Munich, May 8–11 2000

Mahamood RM, Akinlabi ET (2015) Laser metal deposition of functionally graded Ti6Al4V/TiC. Mater Des 84:402–410CrossRef

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2012) Functionally graded material: an overview. Proceedings of the World Congress on Engineering (2012) Vol. III, WCE 2012, London, UK, July 4–6, 2012, pp 1593–1597

10.

Hong C, Dongdong G, Dai D, Gasser A, Weisheit A, Kelbassa I, Zhong M, Poprawe R (2013) Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol 54(30):98–109CrossRef

11.

Mahamood RM, Akinlabi ET (2015) Effect of processing parameters on wear resistance property of laser material deposited titanium-alloy composite. J Optoelectr Adv Mater (JOAM) 17(9–10):1348–1360

12.

Gaufillet J-P, Machi F, Boisselier D, Laubriat E (2016) Cladding and additive manufacturing by laser metal deposition—the time of industrialization. Industrial additive manufacturing with Trumpf. Available at:http://www.industrial-lasers.com/index.html. Accessed on 11 Feb 2017

13.

Gasser A, Backes G, Kelbassa I, Weisheit A, Wissenbach K (2010) Laser additive manufacturing: laser metal deposition (LMD) and selective laser melting (SLM) in turbo-engine applications. Laser Mater Proces 2:58–63

14.

Islam MU, Xue L, McGregor G (2001) Process for manufacturing or repairing turbine engine or compressor components, US Patent 6,269,540

15.

Tormis T (2013) The application of laser cladding to mechanical component repair, renovation and regeneration. Daaam international scientific book 2013, pp 587–608. (Chapter 32)

16.

Nowotny S, Spatzier J, Kubisch F, Scharek S, Ortner J, Beyer E (2012) Repair of erosion defects in gun barrels by direct laser deposition. ASM Int J Thermal Spray Technol 21(6):1173–1183CrossRef

17.

Capello E, Colombo D, Previtali B (2005) Repairing of sintered tools using laser cladding by wire. J Mater Process Technol 164–165:990–1000CrossRef

18.

Graf B, Gumenyuka A, Rethmeier M (2012) Laser metal deposition as repair technology for stainless steel and titanium alloys. Phys Proc 39(2012):376–381. doi:10.1016/j.phpro.2012.10.051 CrossRef

19.

Graf B, Ammer S, Gumenyuk A, Rethmeier M (2013) Design of experiments for laser metal deposition in maintenance, repair and overhaul applications. Proc CIRP 11(2013):245–248. doi:10.1016/j.procir.2013.07.031 CrossRef

20.

Pinkerton* AJ, Wang W, Li L (2008) Component repair using laser direct metal deposition. Proc. IMechE Vol. 222 Part B: J. Engineering Manufacture, pp 827–836

21.

Qi H, Azer M, Singh P (2010) Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils. Int J Adv Manuf Technol 48:121–131CrossRef

22.

Bia G*, Gasser A (2011) Restoration of nickel-base turbine blade knife-edges with controlled laser aided additive manufacturing. Phys Proc 12(2011):402–409

23.

Nowotny S, Scharek S, Beyer E, Richter K-H (2007) Laser beam build-up welding: precision in repair, surface cladding, and direct 3D metal deposition. J Therm Spray Technol 16(3):344–348CrossRef

24.

Xue L, Chen JY, Islam MU, Pritchard J, Manete D, Rush S (2000) Laser consolidation of Ni- base In 738 superalloy for repairing gas turbine blades. In: Proceedings of 19th International Congress on Applications of Lasers and Electro-Optics, Dearborn, MI, USA, October 2–5, 2000

25.

Dodd A, Bialach J (2003) Laser repair turbine blades. Weld J 82(8):43–45

26.

Gandini E, Agnesone F, Taricco F, Arrighi L (1997) Advances in gas turbine blade repair by laser welding. In: The 1997 international gas turbine & aero-engine congress & exposition, Orlando, FL, USA, June 02–05, 1997

27.

Lee JW (1975) Repair of rotating air-sealing components for gas turbine engines. Weld J Res Suppl 54:409-s–415-s

28.

Gandy DW, Frederick GJ, Peterson AJ, Stover JT, Viswanathan R (2000) Development of a laser-based/high strength weld filler process to extend repair limits on In 738 gas turbine blades. In: 4th International EPRI conference welding and repair technology for power plants, Marriott’s Marco Island Resort and Golf Club Naples, Florida, USA, June 07–09, 2000

29.

Rinaldi C, Antonelli G (2005) Epitaxial repair and in situ damage assessment for turbine blades. In: Proc. IMechE, Vol. 219 Part A: J. Power and energy, pp 93–99

30.

Kathuria YP (1997) Laser surface cladding: a unique application to the turbine industry. In: Proceedings of the Laser Assisted Net Shape Engineering 1997, Erlangen, Germany, September 23–26, 1997, pp 631–639

31.

Bremer C (2001) Adaptive welding strategies for repair and overhaul of turbine blades and blisks. In: Proceedings of the Laser Assisted Net Shape Engineering 2001, Erlangen, Germany, August 2001, pp 503–508

32.

Mattheij S, Hendriks M (2004) Laser welding to industrial gas turbine components. In: Sulzer Technical Review, vol 1

33.

Wilson JM, Piya C, Shin YC, Zhao F, Ramani K (2014) Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis. J Clean Prod 80:170–178

34.

Lei X, Huajun C, Hailong L, Yubo Z (2017) Study on laser cladding remanufacturing process with FeCrNiCu alloy powder for thin-wall impeller blade. Int J Adv Manuf Technol, 90(5–8):1383–1392

35.

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2014) Improving surface integrity using laser metal deposition process. In: Santo L, Davim JP (eds) Surface engineering techniques and applications: research advancements. IGI Global, Pennsylvania (USA), pp 146–176. doi:10.4018/978-1-4666-5141-8.ch005

36.

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2014) Characterization of laser deposited Ti6A4V/TiC composite. Lasers Eng 29(3–4):197–213

37.

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2013) Scanning velocity influence on microstructure, microhardness and wear resistance performance on laser deposited Ti6Al4V/TiC composite. Mater Des 50:656–666CrossRef

38.

Mahamood RM, Akinlabi ET (2016) Laser metal deposition of Ti6Al4V/TiC composites using optimized process parameters. Lasers Eng 35(1–4):139–150

39.

Dongdong G, Cao S, Lin K (2016) Laser metal deposition additive manufacturing of TiC reinforced Inconel 625 composites: influence of the additive TiC particle and its starting size. J Manuf Sci Eng 139(4):041014. doi:10.1115/1.4034934 CrossRef

40.

Wilson JM, Shin YC (2012) Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC. Surface Coat Technol 207:517–522

41.

Syed WUH, Pinkerton AJ, Liu Z, Li L (2007) Single-step laser deposition of functionally graded coating by dual ‘wire–powder’ or ‘powder–powder’ feeding—A comparative study. Appl Surf Sci 253(19):7926–7931CrossRef

42.

Carroll BE, Otis RA, Borgonia JP, Suh J-o, Dillon RP, Shapiro AA, Hofmann DC, Liu Z-K, Beese AM (2016) Functionally graded material of 304L stainless steel and Inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling, Acta Mater 108:46–54

43.

Bobbio LD, Otis RA, Borgonia JP, Dillon RP, Shapiro AA, Liu Z-K, Beese AM (2017) Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: experimental characterization and thermodynamic calculations. Acta Mater 127:133–142

44.

Shah K, ul Haq I, Khan A, Shah SA, Khan M, Pinkerton AJ (2014) Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition. Mater Des (1980–2015) 54:531–538

Titel: Areas of Application of Laser Metal Deposition Process–Part Repair and Remanufacturing
verfasst von: Rasheedat Modupe Mahamood
Verlag: Springer International Publishing
Buch: Laser Metal Deposition Process of Metals, Alloys, and Composite Materials
Print ISBN: 978-3-319-64984-9

Electronic ISBN: 978-3-319-64985-6

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-64985-6_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht