Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
International Journal of Geosynthetics and Ground Engineering
Erschienen in: International Journal of Geosynthetics and Ground Engineering 3/2023

01.06.2023 | State of the Art/Practice Paper

Stability and Serviceability Assessment of Reinforced Earth Retaining Structures: A State-of-the-Art and Way Forward

verfasst von: Vairamani Sundaravel, Bollor Shoorappa Gowda Deviprasad, Ramanandan Saseendran, Goudappa Ramanagouda Dodagoudar

Erschienen in: International Journal of Geosynthetics and Ground Engineering | Ausgabe 3/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This paper reviews the previous studies on mechanically stabilized earth (MSE) wall, soil nail (SN) wall, and hybrid earth retaining structures (HERS) to provide a critical appraisal and state-of-the-art review followed by way forward regarding recommendations on the analysis, design, and practice. The first part of the paper deals with the brief review of the deterministic and reliability analyses of the MSE and SN walls. The second part presents the review of the literature related to the HERS, which consists of MSE over SN wall and shored MSE and narrow MSE walls. Even though the HERS are alternative to the MSE and SN walls and are especially effective in hilly terrains, they are not yet that popular owing to the lack of well-established design guidelines and construction procedures. A limited number of studies have been available in the literature on the HERS from the deterministic and probabilistic perspectives and are not available in the main-stream publications. Due to uncertainties of the material parameters of the soil and geo-synthetics, realistic and accurate prediction of the behavior of the reinforced earth retaining structures is very necessary and accordingly the studies reported on reliability studies are reviewed and presented. In the current design practice, the HERS are conservatively designed using guidelines developed for the MSE and SN walls. Therefore, there is a need to develop comprehensive analysis and design procedures for the safe and economical design of HERS.
Vorheriger Artikel Dynamic Stability Analysis of Slope Under the Impact Load of Large Diameter Punched Cast-in-Place Pile
Nächster Artikel Seismic Internal Stability Analysis of Modular Block Reinforced Earth Retaining Wall

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Vidal H (1969) The principle of reinforced earth. Highway Research Record No.: 282.NCR-HRB, Washington, D.C.
2.
Berg RR, Christopher BR, Samtani NC (2009) Design of mechanically stabilised earth walls and reinforced soil slopes, Volumes I and II, Geotechnical Engineering Circular No. 11, Report No. FHWA-NHI-10-024, Federal Highway Administration, Washington, DC
3.
NCMA (2009) Design Manual for Segmental Retaining Walls. In: Bernardi M (eds) National Concrete Masonry Association, Herndon
4.
WSDOT (2006) Geotechnical Design Manual, M 46-03, Chapter 15: Abutments, retaining walls, and reinforced slopes. Washington State Department of Transportation, Olympia, Washington
5.
Geoguide 7 (2008) Guide to soil nail design and construction. The Government of the Hong Kong Special Administrative Region
6.
AASHTO (2020) LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials, Washington, DC
7.
IRC:SP:102 (2014) Guidelines for design and construction of reinforced soil walls. Indian Roads Congress
8.
Rabi M (2016) Performance of hybrid MSE/soil nail walls using numerical analysis and limit equilibrium approaches. HBRC J 12:63–70CrossRef
9.
Bastick MJ (1990) Reinforced earth narrow walls and abutments correlation of measured performance with design. In: Proceedings of Performance of Reinforced Soil, British Geotechnical Society, Glasgow, pp 59–63
10.
Turner JP, Jensen WG, Wolosick J, Falk M (1999) Soil nail and MSE wall for stabilization of the elbow fill slide, Snake River Canyon, Wyoming. In: Proceedings of 50th annual highway geology symposium, Roanoke, pp 232–246
11.
Alexiew D (2004) Solving landslide problems by combined and geosynthetic reinforced systems. In: Proceedings of 9th international symposium on landslides, Rio de Janeiro, pp 1713–1717
12.
Ziai F, Paris A (2004) Review and design approach of a retaining structure built against and connected to a nailed embankment. In: Proceedings of 3rd European geosynthetics conference, Munich, pp 1–4
13.
Bergmann T, Smith ACS (2007) Design and construction of a composite nailed and mechanically stabilized embankment structure across a talus slope. In: Proceedings of 5th international symposium on earth reinforcement, Fukuoka, pp 701–706
14.
Freitag N, Smith ACS, Maritz LHJ (2007) An innovative connection between a nailed slope and an MSE structure: application at Sishen mine, RSA. In: Proceedings of 5th international symposium on earth reinforcement, Fukuoka, pp 141–146
15.
Fan CC, Hsieh CC (2009) Design of a hybrid reinforced earth embankment for roadways in mountainous regions. In: Proceedings of GeoHunan international conference, Hunan, pp 133–144
16.
Fan CC, Hsieh CC (2011) The mechanical behaviour and design concerns for a hybrid reinforced earth embankment built in limited width adjacent to a slope. Comput Geotech 38:233–247CrossRef
17.
Wood TA, Jayawickrama PW, Lawson WD (2009) Instrumentation and monitoring of an MSE/soil nail hybrid retaining wall. In: Proceedings of international foundation congress and equipment expo, Florida, pp 177–184
18.
Fan CC, Hsiao CF (2011) Field performance of a hybrid reinforced earth embankment built adjacent to a slope with narrow fill space. J Geo-Eng 6:47–62
19.
Tavakolian R, Grien M (2011) Narrow shored reinforced earth wall with friction based reinforcing strip connection, as an innovative solution to expand urban highways. In: Proceedings of geo-frontiers, Texas, pp 3469–3476
20.
Durgunoglu HT, Sahin A, Akcakal O (2013) A case study on the use of flexible earth retaining structure in instable slopes. In: Proceedings of 7th international conference on case histories in geotechnical engineering, USA, pp 1–5
21.
Kerfontain S, Sankey J, Freitag N, Lucas E (2016) A fully geosynthetic shored reinforced earth wall. In: Proceedings of 3rd Pan-American conference on geosynthetics, Miami, pp 1–11
22.
Leflaive E (1988) Durability of geotext: the French experience. Geotext Geomembr 7:23–31CrossRef
23.
Puig J, Blivet JC, Pasquet P (1977) Remblai Armé avec un Textile Synthétiqu. In: Proceedings of the international conference on the use of fabrics in geotechnics, Paris, pp 85–90 (French)
24.
Christopher BR, Gill SA, Giroud JP, Juran I, Mitchell JK, Schlosser F, Dunnicliff J (1990) Reinforced soil structures vol. 1: design and construction guidelines. Federal Highway Administration, USA, Report No.: FHWA-RD-89-043
25.
NGG (2005) Nordic guidelines for reinforced soils and fills. Nordic Geosynthetic Group, Nordic Industrial Fund
26.
PWRC (2000) Design and construction manual of geosynthetics reinforced soil, (revised version). Public Works Research Center, Tsukuba
27.
CFEM (2006) Canadian Foundation Engineering Manual. Canadian Geotechnical Society, Richmond
28.
BS 8006-1 (2010) Code of practice for strengthened/reinforced soils and other fills. British Standards Institution, London
29.
BS 8006-2 (2010) Code of practice for strengthened/reinforced soils Part 2: Soil nail design. British Standards Institution, London
30.
Anderson PL, Gladstone RA, Sankey JE (2012) State of the practice of MSE wall design for highway structures. In: Proceedings of geo-congress, California, pp 443–463
31.
Villalobos SA, Villalobos FA (2021) Effect of nail spacing on the global stability of soil nailed walls using limit equilibrium and finite element methods. Transp Geotech 26:100454CrossRef
32.
Claybourn AF, Wu JTH (1993) Geosynthetic-reinforced soil wall design. Geotext Geomembr 12:707–724CrossRef
33.
Rowe RK, Ho SK (1993) A review of the behavior of reinforced soil walls. In: Proceedings of international symposium on earth reinforcement practice, Balkema, pp 801–830
34.
Krahn J (2003) The 2001 R.M. Hardy Lecture: the limits of limit equilibrium analyses. Can Geotech J 40:643–660CrossRef
35.
Allen TM, Bathurst RJ (2013) Comparison of working stress and limit equilibrium behavior of reinforced soil walls. In: Proceedings of geo-congress, San Diego, pp 2–15
36.
Zienkiewicz OC, Humpheson C, Lewis RW (1975) Associated and non-associated visco-plasticity and plasticity in soil mechanics. Géotechnique 25:671–689CrossRef
37.
Matsui T, San KC (1992) Finite element slope stability analysis by shear strength reduction technique. Soils Found 32:59–70CrossRef
38.
Ugai K, Leshchinsky D (1995) Three-dimensional limit equilibrium and finite element analyses: a comparison of results. Soils Found 35:1–7CrossRef
39.
Griffiths DV, Lane PA (1999) Slope stability analysis by finite elements. Géotechnique 49:387–403CrossRef
40.
Dawson EM, Roth WH, Drescher A (1999) Slope stability analysis by strength reduction. Géotechnique 49:835–840CrossRef
41.
Cheng YM, Lansivaara T, Wei WB (2007) Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods. Comput Geotech 34:137–150CrossRef
42.
Mirmoradi S, Ehrlich M (2014) Modeling of the compaction-induced stresses in numerical analyses of GRS walls. Int J Comput Methods 11:1342002CrossRef
43.
Mirmoradi S, Ehrlich M (2015) Numerical evaluation of the behavior of GRS walls with segmental block facing under working stress conditions. J Geotech Geoenviron Eng 141:04014109CrossRef
44.
Mirmoradi S, Ehrlich M (2018) Numerical evaluation of compaction-induced stress for the analysis of RS walls under working conditions. Geotext Geomembr 46:354–365CrossRef
45.
Djabri M, Benmebarek S (2016) FEM analysis of back-to-back geosynthetic-reinforced soil retaining walls. Int J Geosynth Ground Eng 3:1–8
46.
Cristelo N, Felix C, Lopes ML, Dias M (2016) Monitoring and numerical modelling of an instrumented mechanically stabilized earth wall. Geosynth Int 23:48–61CrossRef
47.
Capilleri PP, Ferraiolo F, Motta E, Scotto M, Todaro M (2019) Static and dynamic analysis of two mechanically stabilized earth walls. Geosynth Int 26:26–41CrossRef
48.
Mirmoradi SH, Ehrlich M, Chinchay P, Dieguez C (2019) Evaluation of the combined effect of facing inclination and uniform surcharge on GRS walls. Geotext Geomembr 47:685–691CrossRef
49.
Abdelouhab A, Dias D, Freitag N (2011) Numerical analysis of the behaviour of mechanically stabilized earth walls reinforced with different types of strips. Geotext Geomembr 29:116–129CrossRef
50.
Yu Y, Bathurst RJ, Allen TM, Nelson R (2016) Physical and numerical modelling of a geogrid-reinforced incremental concrete panel retaining wall. Can Geotech J 53:1–19CrossRef
51.
Ling HI, Leshchinsky D (2003) Finite element parametric study of the behavior of segmental block reinforced-soil retaining walls. Geosynth Int 10:77–104CrossRef
52.
Hatami K, Bathurst RJ (2005) Development and verification of a numerical model for the analysis of geosynthetic-reinforced soil segmental walls under working stress conditions. Can Geotech J 42:1066–1085CrossRef
53.
Guler E, Hamderi M, Demirkan MM (2007) Numerical analysis of reinforced soil retaining wall structures with cohesive and granular backfills. Geosynth Int 14:330–345CrossRef
54.
Huang B, Bathurst RJ, Hatami V (2009) Numerical study of reinforced soil segmental walls using three different constitutive soil models. J Geotech Geoenviron Eng 135:1486–1498CrossRef
55.
Damians IP, Bathurst RJ, Josa A, Lloret A (2015) Numerical analysis of an instrumented steel-reinforced soil wall. Int J Geomech 15:04014037CrossRef
56.
Baral P, Bergado DT, Duangkhae S (2016) The use of polymeric and metallic geogrid on a full-scale MSE wall/embankment on hard foundation: a comparison of field data with simulation. Int J Geo-Eng 7:7–20CrossRef
57.
Ling HI, Xu L, Leshchinsky D, Collin JG, Rimoldi P (2016) Centrifugal modeling of reinforced soil retaining walls considering staged construction. In: Proceedings of Geo-Chicago, Chicago, pp 95–105
58.
Scotland I (2016) Analysis of horizontal deformations to allow the optimisation of geogrid reinforced structures. Dissertation, Loughborough University, England
59.
Koerner RM, Koerner GR (2018) An extended data base and recommendations regarding 320 failed geosynthetic reinforced mechanically stabilized earth (MSE) walls. Geotext Geomembr 46:904–912CrossRef
60.
Hermann LR, Al-Yassin Z (1978) Numerical analysis of reinforced soil systems. In: Proceedings of symposium on earth reinforcement, USA, pp 428–457
61.
Gourc JP, Ratel A, Delmas P (1986) Design of fabric retaining walls: the displacements method. In: Proceedings of 3rd international conference on geotextiles and geomembranes, Vienna
62.
Gourc JP, Gotteland P, Delmas P (1988) Design of geosynthetic retaining walls: Displacements method and two blocks method. Comparison and charts. In: Proceedings of international geotechnical symposium on theory and practice of earth reinforcement, Fukuoka, pp 517–522
63.
Adib ME. Internal lateral earth pressure in earth walls (1988) Dissertation, University of California, Berkeley
64.
Giroud JP (1989) Geotextile engineering workshop-Design examples. Federal Highway Administration, Washington, D.C., USA, Report No.: FHWA-HI-89-002
65.
Jewell RA, Milligan GW (1989) Deformation calculation for reinforced soil walls. In: Proceedings of 12th International conference on soil mechanics and foundation engineering, Rio de Janeiro, pp 1259–1262
66.
O’Rourke TD, Jones CJFP (1990) Overview of earth retention systems: 1970–1990. In: Proceedings of design and performance of earth retaining structures, pp 22–51
67.
Christopher BR (1993) Deformation response and wall stiffness in relation to reinforced soil wall design. Dissertation, Purdue University, Indiana
68.
Chew SH, Mitchell JK (1994) Deformation evaluation procedure for reinforced soil walls. In: Proceedings of 5th international conference on geotext, geomembr and related products, Singapore, pp 171–176
69.
Wu JTH (1994) Design and construction of low cost retaining walls: The next generation in technology. Colorado Transportation Institute, Denver, Report No.: CTI-UCD-1-94
70.
Lee WF (2000) Internal stability analyses of geosynthetic reinforced retaining walls. Dissertation, University of Washington, USA
71.
Bathurst RJ, Allen TM, Walters DL (2002) Short-term strain and deformation behaviour of geosynthetic walls at working stress conditions. Geosynth Int 9:451–482CrossRef
72.
Allen TM, Bathurst RJ, Holtz RD, Walters DL, Lee WF (2003) A new working stress method for prediction of reinforcement loads in geosynthetic walls. Can Geotech J 40:976–994CrossRef
73.
Al Hattamleh O, Muhunthan B (2006) Numerical procedures for deformation calculations in the reinforced soil walls. Geotext Geomembr 24:52–57CrossRef
74.
Correia AAS, Pinto MIM, Lopes MLC (2011) Design brick faced retaining walls reinforced with Geotext: face deformation. J Geotech Geoenviron Eng 138:629–632CrossRef
75.
Wu JTH, Pham TQ, Adams MT (2013) Composite behaviour of geosynthetic reinforced soil mass. McLean, Virginia, Report No.: FHWA-HRT-10-077
76.
Liu H, Yang G (2015) Analytical method for the lateral displacements of steel reinforced soil walls on stiff foundations with incremental panel facings. Géotechnique 65:728–739CrossRef
77.
Scarborough JA (2005) A tale of two walls: Case histories of failed MSE walls. In: Proceedings of geo-frontiers, Texas, pp 1–12
78.
Mahmood T (2009) Failure analysis of a mechanically stabilized earth (MSE) wall using finite element program Plaxis. Dissertation, University of Texas, Arlington
79.
Hossain MS, Kibria G, Khan MS, Hossain J, Taufiq T (2012) Effects of backfill on excessive movement of MSE wall. J Perform Constr Facil 26:793–802CrossRef
80.
Kibria G, Hossain MDS, Khan MS (2014) Influence of soil reinforcement on horizontal displacement of MSE wall. Int J Geomech 14:130–141CrossRef
81.
EBGEO (2010) Recommendation for design and analysis of earth structures using geosynthetics, EBGEO. German Geotechnical Society, Ernst and Sohn Berlin
82.
Adams MT, Lillis CP, Wu JTH, Ketchart K (2002) Vegas mini pier experiment and postulate of zero volume change. In: Proceedings of 7th international conference on geosynthetics, Netherlands, pp 389–394
83.
Tatsuoka F (1993) Keynote Lecture: roles of facing rigidity in soil reinforcing. In: Proceedings of international symposium on earth reinforcement practice. Fukuoka, pp 831–870
84.
Ho SK, Rowe RK (1996) Effect of wall geometry on the behaviour of reinforced soil walls. Geotext Geomembr 14:521–541CrossRef
85.
Leshchinsky D, Vulova C (2001) Numerical investigation of the effects of geosynthetic spacing on failure mechanisms in MSE block walls. Geosynth Int 8:343–365CrossRef
86.
Liu H (2012) Long-term lateral displacement of geosynthetic-reinforced soil segmental retaining walls. Geotext Geomembr 32:18–27CrossRef
87.
Rahmouni O, Mabrouki A, Benmeddour D, Mellas M (2016) A numerical investigation into the behavior of geosynthetic-reinforced soil segmental retaining walls. Int J Geotech Eng 10:435–444CrossRef
88.
Helwany SMB, Reardon G, Wu JTH (1999) Effects of backfill on the performance of GRS retaining walls. Geotext Geomembr 17:1–16CrossRef
89.
Hatami K, Bathurst RJ, Pietro PD (2001) Static response of reinforced-soil retaining walls with non-uniform reinforcement. Int J Geomech 1:477–506CrossRef
90.
Holtz RD, Lee WF (2001) Internal stability analysis of geosynthetic reinforced retaining walls. Washington State Dept. of Transportation, Olympia, Final Research Report No.: WA-RD 532.1
91.
Yoo C (2004) Performance of a 6-year-old geosynthetic-reinforced segmental retaining wall. Geotext Geomembr 22:377–399CrossRef
92.
Kim YS, Won MS (2006) Deformation behaviors of geosynthetic reinforced soil walls on shallow weak ground. In: Proceedings of soil stress-strain behavior: measurement, modeling and analysis, Rome, pp 819–830
93.
Bilgin Ö, Mansour E (2014) Effect of reinforcement type on the design reinforcement length of mechanically stabilized earth walls. Eng Struct 59:663–673CrossRef
94.
Bilgin Ö, Kim H (2010) Effect of soil properties and reinforcement length on mechanically stabilised earth wall deformations. In: Proceedings of earth retention conference, Washington, pp 556–563
95.
Hatami K, Witthoeft AF, Jenkins LM (2008) Influence of inadequate compaction near the facing on the construction response of wrapped-face MSE walls. Transp Res Rec 2045:85–94CrossRef
96.
Ehrlich M, Mirmoradi SH, Saramago RP (2012) Evaluation of the effects of compaction on the behavior of geosynthetic-reinforced soil walls. Geotext Geomembr 34:108–115CrossRef
97.
Zheng YW, Fox PJ, McCartney JS (2018) Numerical simulation of deformation and failure behavior of geosynthetic reinforced soil bridge abutments. J Geotech Geoenviron Eng 144:04018037CrossRef
98.
Nascimento G, Ehrlich M, Mirmoradi SH (2020) Numerical- simulation of compaction-induced stress for the analysis of RS walls under surcharge loading. Geotextile Geomembr 48:532–538CrossRef
99.
Ehrlich M, Mirmoradi SH, Tortureli M (2021) Numerical evaluation of backfill compaction behind the face of reinforced soil walls. Proc Inst Civ Eng Geotech Eng 176:74–85CrossRef
100.
Schmertmann GR, Chew SH, Mitchell JK (1989) Finite element modeling of reinforced soil wall behaviour. University of California, Berkeley, Geotechnical Engineering Report No.: UCB/GT/89-01
101.
Kazimierowicz-Frankowska K (2005) A case study of a geosynthetic reinforced wall with wrap-around facing. Geotext Geomembr 23:107–115CrossRef
102.
Huang B, Bathurst RJ, Hatami K, Allen TM (2010) Influence of toe restraint on reinforced soil segmental walls. Can Geotech J 47:885–904CrossRef
103.
Mirmoradi SH, Ehrlich M, Dieguez C (2016) Evaluation of the combined effect of toe resistance and facing inclination on the behavior of GRS walls. Geotext Geomembr 44:287–294CrossRef
104.
Mirmoradi SH, Ehrlich M, Magalhães LFO (2021) Numerical evaluation of the effect of foundation on the behaviour of reinforced soil walls. Geotext Geomembr 49:619–628CrossRef
105.
Khosrojerdi M, Xiao M, Qiu T, Nicks J (2016) Evaluation of prediction methods for lateral deformation of GRS walls and abutments. J Geotech Geoenviron Eng 143:06016022CrossRef
106.
Pramanik R, Mukherjee S, Babu GLS (2022) Deterministic and probabilistic prediction of maximum wall facing displacement of geosynthetic-reinforced soil segmental walls using multivariate adaptive regression splines. Transp Geotech 36:100816CrossRef
107.
Morsy AM, Zornberg JG, Christipher BR, Leshchinsky D (2020) Lateral displacements in geosynthetic-reinforced soil structures with segmental-block facing systems. In: Proceedings of 4th Pan American conference on geosynthetics, USA
108.
Khosrojerdi M, Xiao M, Qiu T, Nicks J (2020) Prediction equations for estimating maximum lateral displacement and settlement of geosynthetic reinforced soil abutments. Comput Geotech 125:103622CrossRef
109.
Sayed S, Dodagoudar GR, Rajagopal K (2010) Finite element reliability analysis of reinforced retaining walls. Geomech Geoeng 5:187–197CrossRef
110.
Wu JTH, Pham TQ (2010) An analytical model for evaluation of compaction-induced stresses in a reinforced soil mass. Int J Geotech Eng 4:549–556CrossRef
111.
Adams M, Nicks J, Stabile T, Wu JTH, Schlatter W, Hartmann J (2011a) Geosynthetic reinforced soil integrated bridge system interim implementation guide. Federal Highway Administration, Washington, DC, Report No.: FHWA-HRT-11-026
112.
Adams M, Nicks J, Stabile T, Wu JTH, Schlatter W, Hartmann J (2011b) Geosynthetic reinforced soil integrated bridge system synthesis report. Federal Highway Administration, McLean, VA, Report No.: FHWA-HRT-11-027
113.
Allen TM, Bathurst RJ (2015) An improved simplified method for prediction of loads in reinforced soil walls. J Geotech Geoenviron Eng 141:1–14CrossRef
114.
Lin BH, Yu Y, Bathurst RJ, Liu CN (2016) Deterministic and probabilistic prediction of facing deformations of geosynthetic-reinforced MSE walls using a response surface approach. Geotext Geomembr 44:813–823CrossRef
115.
Yu Y, Bathurst RJ (2017) Probabilistic assessment of reinforced soil wall performance using response surface method. Geosynth Int 24:524–542CrossRef
116.
Hamrouni A, Das D, Sbartai B (2018) Reliability analysis of a mechanically stabilized earth wall using the response surface methodology optimized by a genetic algorithm. Geomech Eng 15:937–945
117.
Toufigh V, Pahlavani H (2018) Probabilistic-based analysis of MSE walls using the latin hypercube sampling method. Int J Geomech 18:04018109CrossRef
118.
Duncan JM (2000) Factors of safety and reliability in geotechnical engineering. J Geotech Geoenviron Eng 126:307–316CrossRef
119.
Chalermyanont T, Benson C (2004) Reliability-based design for internal stability of mechanically stabilized earth walls. J Geotech Geoenviron Eng 130:163–173CrossRef
120.
Phoon KK, Kulhawy FH (1999) Characterization of geotechnical variability. Can Geotech J 36:612–624CrossRef
121.
Phoon KK, Kulhawy FH (1999) Evaluation of geotechnical property variability. Can Geotech J 36:625–639CrossRef
122.
Phoon KK, Tang C (2019) Characterisation of geotechnical model uncertainty. Georisk Assess Manage Risk Eng Syst Geohazards 13:101–130CrossRef
123.
Tang C, Phoon KK (2021) Model uncertainties in foundation design, 1st edn. CRC Press Taylor and Francis Group, Boca Raton CrossRef
124.
Meyerhoff GG (1970) Safety factors in soil mechanics. Can Geotech J 7:349–355CrossRef
125.
Basheer IA, Najjar YM (1994) Reliability based design of reinforced earth retaining walls. Transp Res Rec 1526:64–78CrossRef
126.
Basma AA, Barakat SA, Omar MT (2003) Reliability based risk index for the design of reinforced earth structures. Geotech Geol Eng 21:225–242CrossRef
127.
Chalermyanont T, Benson C (2005) Reliability-based design for external stability of mechanically stabilized earth (MSE) walls. Int J Geomech 5:196–205CrossRef
128.
Sayed S, Dodagoudar GR, Rajagopal K (2008) Reliability analysis of reinforced soil walls under static and seismic forces. Geosynth Int 15:246–257CrossRef
129.
Wang L, Powers M, Gong W (2017) Reliability analysis of geosynthetic reinforced soil walls. In: Proceedings of geo-risk, Denver, pp 91–100
130.
Bathurst RJ, Lin P, Allen TM (2019) Reliability based design of internal limit states for mechanically stabilized earth walls using geosynthetic reinforcement. Can Geotech J 56:774–788CrossRef
131.
Wong FS (1985) Slope reliability and response surface method. J Geotech Eng 111:32–53CrossRef
132.
Xu B, Low BK (2006) Probabilistic stability analyses of embankments based on finite-element method. J Geotech Geoenviron Eng 132:1444–1454CrossRef
133.
Bathurst RJ, Yu Y (2018) Probabilistic prediction of reinforcement loads for steel MSE walls using response surface method. Int J Geomech 18:1–13CrossRef
134.
Wu YC, Liu CN, Lin BH (2020) Reliability based design for deformation targeted segment mechanically stabilized earth wall. J GeoEngin 15:1–11
135.
Kim D, Salgado R (2012a) Resistance factors for MSE wall sliding and overturning checks. In: Proceedings of GeoCongres, California, pp 25–29
136.
Kim D, Salgado R (2012) Load and resistance factors for external stability checks of mechanically stabilized earth walls. J Geotech Geoenviron Eng 138:241–251CrossRef
137.
Kim D, Salgado R (2012) Load and resistance factors for internal stability checks of mechanically stabilized earth walls. J Geotech Geoenviron Eng 138:910–921CrossRef
138.
Basha BM, Sivakumar Babu GL (2013) Reliability based LRFD approach for external stability of reinforced soil walls. Indian Geotech J 43:292–302CrossRef
139.
Basha BM, Babu GLS (2013b) System reliability-based load resistance factor design (LRFD) for external seismic stability of reinforced soil walls. In: Proceedings of ASCE geotechnical special publication, California
140.
Lin P, Bathurst RJ (2018) Reliability-based internal limit states analysis and design of soil nails using different load and resistance models. J Geotech Geoenviron Eng 144:04018022CrossRef
141.
Bathurst RJ, Allen TM, Nowak AS (2008) Calibration concepts for load and resistance factor design (LRFD) of reinforced soil walls. Can Geotech J 45:1377–1392CrossRef
142.
Bathurst RJ, Huang B, Allen TM (2012) LRFD calibration of the ultimate pullout limit state for geogrid reinforced soil retaining walls. Int J Geomech 12:399–413CrossRef
143.
Bathurst RJ, Allen TM, Miyata Y, Javankhoshdel S, Bozorgzadeh N (2019) Performance-based analysis and design for internal stability of MSE walls. Georisk Assess Manage Risk Eng Syst Geohazards 13:214–223CrossRef
144.
Chalermyanont T, Benson C (2005b) Method to estimate the system probability of failure of mechanically stabilized earth (MSE) walls. In: Proceedings of sessions of the geo-frontiers congress, Texas, pp 1–15
145.
Zevgolisa IE, Bourdeaub PL (2010) System reliability analysis of the external stability of reinforced soil structures. Georisk Assess Manage Risk Eng Syst Geohazards 4:148–156CrossRef
146.
Zevgolis IE, Bourdeau PL (2017) Reliability and redundancy of the internal stability of reinforced soil walls. Comput Geotech 84:152–163CrossRef
147.
Mahapatra S, Basha BM, Manna B (2021) System reliability framework for design of MSE walls for vertical expansion of MSW landfills. J Hazard Toxic Radioact Waste 25:04020060CrossRef
148.
Rabcewicz LV (1964) The new Austrian tunnelling method, Part 1. Water Power 16:453–457
149.
Rabcewicz LV (1964) The new Austrian tunnelling method, Part 2. Water Power 16:511–516
150.
Bruce DA, Jewell RA (1987) Soil nailing: application and practice—Part 2. Gr Eng 20:21–33
151.
Bruce DA, Jewell RA (1986) Soil nailing: application and practice—Part 1. Gr Eng 19:10–15
152.
Watkins AT, Powell GE (1992) Soil nailing to existing slopes as landslip preventive works. In: Proceedings of Hong Kong Engineer, vol 20, pp 20–46
153.
Babu GLS, Rao RS, Dasaka SM (2007) Stabilisation of vertical cut supporting a retaining wall using soil nailing: a case study. Gr Improv 11:157–163CrossRef
154.
Koerner RM (2015) In-situ stabilization of soil slopes using nailed or anchored geosynthetics. Int J Geosynth Gr Eng 1:1–9
155.
Babu GLS, Jaladurgam R (2015) Rehabilitation of distressed retaining walls using soil nails. In: Proc Inst Civ Eng Gr Improv, pp 22–32
156.
Birchmier M, Lobato C (2014) An innovative case study on the use of launched nails for landslide repair. In: Proceedings of biennial rocky mountain geo-conference, Lakewood, pp 139–147
157.
Rout SK, De M, Mandal AK, Das B (2019) Soil nailing for failed slope stabilization on hilly terrain. In: Proceedings of geotechnics for transportation infrastructure, Singapore, pp 625–638
158.
Zhou YD, Cheuk CY, Tham LG (2009) Numerical modeling of soil nails in loose fill slope under surcharge loading. Comput Geotech 36:837–850CrossRef
159.
Nowatzki E, Samtani N (2004) Design, construction, and performance of an 18-meter soil nail wall in Tucson, AZ. In: Proceedings of geosupport conference, USA, pp 741–752
160.
Seo HJ, Lee IM, Lee SW (2014) Optimization of soil nailing design considering three failure modes. KSCE J Civ Eng 18:488–496CrossRef
161.
Cheuk CY, Ng CWW, Sun HW (2005) Numerical experiments of soil nails in loose fill slopes subjected to rainfall infiltration effects. Comput Geotech 32:290–303CrossRef
162.
Kim Y, Lee S, Jeong S, Kim J (2013) The effect of pressure-grouted soil nails on the stability of weathered soil slopes. Comput Geotech 49:253–263CrossRef
163.
Duncan M, Wright SG (2005) Soil strength and slope stability. Wiley, Hoboken
164.
Singh VP, Babu GLS (2010) 2D Numerical simulations of soil nail walls. Geotech Geol Eng 28:299–309CrossRef
165.
Sheahan TC, Ho CL (2003) Simplified trial wedge method for soil nailed wall analysis. J Geotech Geoenviron Eng 2:117–124CrossRef
166.
Stocker M, Korber G, Gassler G, Gudehus G (1979) Soil nailing. In: Proceedings of international conference on soil reinforcement, Paris, pp 469–474
167.
Kim JS, Park CL, Kim JY, Lee SD, Lee SR (1996) A large-scale experimental study of soil-nailed structures. In: Proceedings of international symposium on earth reinforcement, Balkema, pp 775–781
168.
Shen CK, Bang S, Herrmann LR (1981) Ground movement analysis of an earth support system. J Geotech Geoenviron Eng-ASCE 107(12):1609–1624
169.
Juran I, Baudrand G, Farrag K, Elias V (1990) Kinematical limit analysis for design of soil-nailed structures. J Geotech Eng 116:54–72CrossRef
170.
Plumelle C, Schlosser F (1990) A French national research project on soil nailing: CLOUTERRE. In: Proceedings of international reinforced soil conference glasgow
171.
Basset RA, Last NC (1978) Reinforcing earth below footings and embankments. In: Proceedings of symposium on earth reinforcement, Pittsburgh, pp 202–231
172.
Schlosser F, Unterreiner P (1991) Soil nailing in France; research and practice. Transp Res Rec 1330:72–79
173.
Hajialilue-Bonab M, Razavi SK (2016) A study of soil-nailed wall behaviour at limit states. Proc Inst Civ Eng Gr Improv 169:64–77
174.
Tei K, Taylor RN, Milligan GWE (1998) Centrifuge model tests of nailed soil slopes. Soils Found 38:165–177CrossRef
175.
Wei WB, Cheng YM (2010) Soil nailed slope by strength reduction and limit equilibrium methods. Comput Geotech 37:602–618CrossRef
176.
Prashant A, Mukherjee M (2010) Soil nailing for stabilization of steep slopes near railway tracks. Indian Institute of Technology, Kanpur, Research Design and Standard Organisation, Lucknow
177.
Maleki MR, Mahyar M (2012) Effect of nail characteristics on slope stability based on limit equilibrium and numerical methods. Geomech Geoeng 7:197–207CrossRef
178.
Sanvitale N, Simonini P, Bisson A, Cola S (2013) Role of the facing on the behaviour of soil-nailed slopes under surcharge loading. In: Proceedings of international conference on soil mechanics and geotechnical engineering, Paris, pp 2091–2094
179.
Asoudeh A, Oh E (2014) Strength parameter selection in stability analysis of residual soil nailed walls. Int J Geomate 7:950–954
180.
Zhang G, Cao J, Wang L (2014) Failure behavior and mechanism of slopes reinforced using soil nail wall under various loading conditions. Soils Found 54:1175–1187CrossRef
181.
Ghareh S (2015) Parametric assessment of soil-nailing retaining structures in cohesive and cohesionless soils. Measurement 73:341–351CrossRef
182.
Zolqadr E, Yasrobi SS, Olyaei MN (2016) Analysis of soil nail walls performance—case study. Geomech Geoeng 11:1–12CrossRef
183.
Razavi SK, Bonab MH (2017) Study of soil nailed wall under service loading condition. Proc Inst Civ Eng Geotech Eng 170:161–174CrossRef
184.
Alsubal S, Harahap IS, Babangida NM (2017) A typical design of soil nailing system for stabilizing a soil slope: case study. Indian J Sci Technol 10:1–7CrossRef
185.
Lazarte CA, Robinson H, Gomez JE, Baxter A, Cadden A, Berg R (2015) Soil nail walls—Reference manual. Federal Highway Administration, Washington, DC, Geotechnical Engineering Circular No.: 7, Report No.: FHWA-NHI-14-007
186.
CLOUTERRE (1991) Recommendations Clouterre: Soil nailing recommendations for designing, calculating, constructing and inspecting earth support systems using soil nailing. Federal Highway Administration, Washington, DC, Report No.: FHWA-SA-93-026
187.
AS 4678 (2002) Earth-retaining structures. Standards Australia, Sydney
188.
Eurocode 7 (2004) Geotechnical design—Part 1: general rules. CEN, Brussels
189.
CIRIA (2005) CIRIA C637: Soil nailing—best practice guidance. London
190.
Zevgolis IE, Daffas ZA (2018) System reliability assessment of soil nail walls. Comput Geotech 98:232–242CrossRef
191.
Sharma A, Ramkrishnan R (2020) Parametric optimization and multi-regression analysis for soil nailing using numerical approaches. Geotech Geol Eng 38:3505–3523CrossRef
192.
Babu GLS, Singh VP (2009) Deformation and stability regression models for soil nail walls. Proc Inst Civ Eng Geotech Eng 162:213–223CrossRef
193.
Babu GLS, Singh VP (2010) Reliability analyses of a prototype soil nail wall using regression models. Geomech Eng 2:71–88CrossRef
194.
Lin P, Liu J, Yuan X (2017) Reliability analysis of soil nail walls against external failures in layered ground. J Geotech Geoenviron Eng 143:04016077CrossRef
195.
Lin P, Liu J (2017) Analysis of resistance factors for LFRD of soil nail walls against external stability failures. Acta Geotech 12(1):157–169CrossRef
196.
Plumelle C, Schlosser F, Delage P, Knochenmus G (1990) French national research project on soil nailing: Clouterre. In: Proceedings of design and performance of earth retaining structures, New York, pp 660–675
197.
Yuan J, Lin P, Huang R, Que Y (2019) Statistical evaluation and calibration of two methods for predicting nail loads of soil nail walls in China. Comput Geotech 108:269–279CrossRef
198.
Yuan J, Lin P, Mei G, Hu Y (2019) Statistical prediction of deformations of soil nail walls. Comput Geotech 115:103168CrossRef
199.
Ehrlich M, Almeida MSS, Lima AM (1996) Parametric numerical analyses of soil nailing systems. In: Proceedings of international symposium on earth reinforcement, Rotterdam, pp 747–752
200.
Unterreiner P, Benhamida B, Schlosser F (1997) Finite element modelling of the construction of a full-scale experimental soil–nailed wall, French National Research Project CLOUTERRE. Proc Inst Civ Eng Gr Improv 1:1–8
201.
Yang MZ, Drumm EC (2000) Numerical analysis of the load transfer and deformation in a soil nailed slope. In: Proceedings of Geo-Denver, Colorado, pp 102–115
202.
Lima AP, Gerscovich DM, Sayão ASFJ (2003) Deformability analysis of nailed soil slopes. In: Proceedings of 12th Pan-American conference for soil mechanics and geotechnical engineering, Boston, pp 2127–2132
203.
Wanstreet P (2007) Finite element analysis of slope stability. Dissertation, West Virginia University, USA
204.
Mohamed A (2010) Design charts for soil nailing. Dissertation, Shobra Benha University, Egypt
205.
Halabian AM, Sheikhbahaei AM, Hashemolhosseini SH (2012) Three-dimensional finite difference analysis of soil-nailed walls under static conditions. Geomech Geoeng 7:183–196CrossRef
206.
Rotte VM, Viswanadham BVS (2013) Influence of nail inclination and facing material type on soil-nailed slopes. Proc Inst Civ Eng Gr Improv 166:86–107
207.
Rawat S, Gupta AK (2016) Analysis of a nailed soil slope using limit equilibrium and finite element methods. Int J Geosynth Ground Eng 2:1–23CrossRef
208.
Zhang M, Song E, Chen Z (1999) Ground movement analysis of soil nailing construction by three-dimensional (3-D) finite element modeling (FEM). Comput Geotech 25:191–204CrossRef
209.
Patra CR, Basudhar PK (2005) Optimum design of nailed soil slopes. Geotech Geol Eng 23:273–296CrossRef
210.
Babu GLS, Murthy BRS, Srinivas A (2002) Analysis of construction factors influencing the behavior of soil nailed earth retaining walls. Proc Inst Civ Eng Gr Improv 6:137–143
211.
Murthy S, Babu GLS, Srinivas A (2002) Analysis of prototype soil-nailed retaining wall. Proc Inst Civ Eng Gr Improv 6(3):129–136
212.
Lin H, Xiong W, Cao P (2013) Stability of soil nailed slope using strength reduction method. Eur J Environ Civ Eng 17:872–885CrossRef
213.
Liu J, Shang K, Wu X (2016) Stability analysis and performance of soil-nailing retaining system of excavation during construction period. J Perform Constr Facil 30:C4014002–C4014011CrossRef
214.
Hitha S, Vijayashree S, Sharma A, Ramakrishnan R (2019) Regression analysis of soil nailing parameters using finite element and limit equilibrium methods. Aust Geomech J 54(3):137–147
215.
Bridle RJ, Davies MCR (1997) Analysis of soil nailing using tension and shear: experiment observations and assessment. Proc Inst Civ Eng Geotech Eng 125:155–167CrossRef
216.
Li J, Tham L, Junaideen S, Yue Z, Lee C (2008) Loose fill slope stabilization with soil nails: full-scale test. J Geotech Geoenviron Eng 134:277–288CrossRef
217.
Davis AJ, Drake AR (2014) Soil nailing on the A3 hindhead scheme, UK: a large-scale pre-construction trial. Proc Inst Civ Eng Geotech Eng 167:229–237CrossRef
218.
Ehrlich M, Silva RC (2015) Behavior of a 31 m-high excavation supported by anchoring and nailing in residual soil of gneiss. Eng Geol 191:48–60CrossRef
219.
Mickovski SB, Lindsay FM, Smith MJ (2016) Construction and testing of self-drilled soil nails. Proc Inst Civ Eng Geotech Eng 169:541–553CrossRef
220.
Rawat S, Gupta AK (2018) Testing and modelling of screw nailed soil slopes. Indian Geotech J 48:52–71CrossRef
221.
Davies M, Morgan N (2005) The influence of the variation of effective stress on the serviceability of soil nailed slopes. In: Proceedings of 16th international conference on soil mechanics and geotechnical engineering, Japan, pp 1335–1338
222.
Rotte VM, Viswanadham BVS (2014) Centrifuge and numerical model studies on the behaviour of soil-nailed slopes with and without slope facing. In: Proceedings of Geo-Shanghai, China, pp 581–591
223.
Fan CC, Luo JH (2008) Numerical study on the optimum layout of soil-nailed slopes. Comput Geotech 35:585–599CrossRef
224.
Bridges C, Gudgin J (2014) A soil-nailed excavation for the Brisbane Airport Link project, Australia. Proc Inst Civ Eng Geotech Eng 167:205–216CrossRef
225.
Bridle RJ (1989) Soil nailing-analysis and design. Gr Eng 22:52–56
226.
Jewell RA, Pedley MJ (1990) Soil nailing design: the role of bending stiffness. Gr Eng 23:30–36
227.
Jewell RA, Pedley MJ (1992) Analysis for soil reinforcement with bending stiffness. J Geotech Eng 118:1505–1528CrossRef
228.
Sabahit N, Basudhar PK, Madhav MR (1995) A generalized procedure for the procedure for the optimum design of nailed soil slopes. Int J Numer Anal Methods Geomech 19:437–452MATHCrossRef
229.
Pun WK, Urciuoli G (2008) Soil nailing and subsurface drainage for slope stabilization. In: Proceedings of landslides and engineered slopes—from the past to the future, China, pp 85–126
230.
Babu GLS, Singh VP (2009) Appraisal of soil nailing design. Indian Geotech J 39:81–95
231.
Patra CR, Basudhar PK (2001) Nailed soil structure: an overview. Indian Geotech J 31:322–362
232.
Yuan J, Lin P (2018) Reliability analysis of soil nail internal limit states using default FHWA load and resistance models. Mar Georesour Geotechnol 37:783–800CrossRef
233.
Hu Y, Lin P, Guo C, Mei G (2020) Assessment and calibration of two models for estimation of soil nail loads and system reliability analysis of soil nails against internal failures. Acta Geotech 15:2941–2968CrossRef
234.
Johari A, Hajivand AK, Binesh SM (2020) System reliability analysis of soil nail wall using random finite element method. Bull Eng Geol Environ 79:2777–2798CrossRef
235.
Yuan JX, Yang Y, Tham LG, Lee PKK, Tsui Y (2003) New approach to limit equilibrium and reliability analysis of soil nailed walls. Int J Geomech 3:145–151CrossRef
236.
Hu H, Lin P (2018) Probabilistic prediction of maximum tensile loads in soil nails. Adv Civ Eng 2018:1–12
237.
Sundaravel V (2021) Finite element reliability analyses of hybrid earth retaining structures. Dissertation, Indian Institute of Technology Madras, India
238.
Hu H, Lin P (2019) Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models. Mar Georesour Geotechnol 38:332–348CrossRef
239.
Babu GLS, Singh VP (2011) Reliability-based load and resistance factors for soil-nail walls. Can Geotech J 48:915–930CrossRef
240.
Lazarte CA (2011) Proposed specifications for LRFD soil-nailing design and construction. Transportation Research Board, Washington, DC, NCHRP Report 701
241.
Lin P, Liu J (2019) Evaluation and calibration of ultimate bond strength models for soil nails using maximum likelihood method. Acta Geotech 15:1993–2015CrossRef
242.
Lin P, Bathurst RJ (2019) Calibration of resistance factors for load and resistance factor design of internal limit states of soil nail walls. J Geotech Geoenviron Eng 145:04018100CrossRef
243.
Turner JP, Jensen WG (2005) Landslide stabilisation using soil nail and mechanically stabilized earth walls: case study. J Geotech Geoenviron Eng 131:141–150CrossRef
244.
Wei Y (2013) Development of equivalent surcharge loads for the design of soil nailed segment of MSE/soil nail hybrid retaining walls based on results from full-scale wall instrumentation and finite element analysis. Dissertation, Texas Tech University, Lubbock
245.
Alhabshi A (2006) Finite element based design procedures for MSE/soil-nail hybrid retaining wall systems. Dissertation, Tech University, Lubbock
246.
Abbas H, El-Sherbiny R, Salem A (2018) Numerical analysis of mechanically stabilized earth walls in hybrid retaining wall systems. In: Proceedings of international congress and exhibition, Cairo. Springer, Cham, pp 249–264
247.
248.
Eldiasty WA, Altahrany AI, Elmeligy MM (2019) Comparison between monotype and hybrid earth retaining structures. Innov Infrastruct Solut 4:1–13CrossRef
249.
Anderson PL, Gladstone RA, Brabant K, Sankey J (2018) Back-to-back MSE walls–a comprehensive understanding. In: Proceedings of innovations in geotechnical engineering, March, Orlando, pp 431–447
250.
Brandl H (1998) Multi-anchored soil retaining walls with geosynthetic loop anchors. In: Proceedings of 6th international conference on geosynthetics, Atlanta, pp 581–586
251.
Tatsuoka F, Tateyama M, Koseki J, Yonezawa Y (2014) Geosynthetic-reinforced soil structures for railways in Japan. Transp Infrastruct Geotechnol 1:3–43CrossRef
252.
Kerfontain S, Sankey J, Freitag N, Lucas E (2016) A fully geosynthetic shored reinforced earth wall. Proceedings of 3rd Pan-American conference on geosynthetics, Miami, April, pp 1–11
253.
Wilson P, Essery D, Taylor TP (2019) St. Jacques-Pullman MSE Walls–Lessons Learned. Transportation association of Canada and ITS Canada Joint Conference and Exhibition, Halifax
254.
Lin CC, Hsieh TJ, Tsao WH, Wang YH (1997) Combining multi-nailings with soil reinforcement for construction. In: Proceedings of international symposium on mechanically stabilized backfill, Colorado, pp 255–257
255.
Yang KH, Liu CN (2007) Finite element analysis of earth pressures for narrow retaining walls. J GeoEngin 2:43–52
256.
Yang KH, Kniss KT, Zornberg JG, Wright SG (2008) Finite element analyses for centrifuge modelling of narrow MSE walls. Proceedings of 1st Pan American geosynthetics conference and exhibition, GEOAMERICAS, Cancun, March, pp 1246–1255
257.
Abdelrahman GE, Youssef YG, Kamel MM (2014) Parametric study for narrow mechanically stabilized earth walls. In: Proceedings of 39th annual conference on deep foundations, Atlanta, pp 1943–1946
258.
Ren FF, Hao Q, Wang G (2019) Numerical comparison on deformation characteristics of the shored mechanically stabilized earth wall between reduced-scale and full-scale models. Soil Mech Found Eng 56:302–308CrossRef
259.
Abbas H, El-Sherbiny R, Salam A (2020) Numerical analysis of soil nail walls in hybrid retaining wall systems. In: Proceedings of geo-congress, Reston, pp 394–405
260.
Vulova C (2000) Effects of geosynthetic reinforcement spacing on the behavior of mechanically stabilized earth walls [dissertation]. Department of Civil Engineering, University of Delaware, Newark, Delaware
261.
Leshchinsky D, Hu Y, Han J (2004) Limited reinforced space in segmental retaining walls. Geotext Geomembr 22:543–553CrossRef
262.
Tavakolian R, Sankey J (2009) Sandwich connection design for shored reinforced earth walls. In: Proceedings of 17th International conference on soil mechanics and geotechnical engineering, Alexandria, pp 1441–1454
263.
Han J, Leshchinsky D (2010) Analysis of back-to-back mechanically stabilized earth walls. Geotext Geomembr 28:262–267CrossRef
264.
Kniss KT, Wright SG, Zornberg J, Yang KH (2007) Design considerations for MSE retaining walls constructed in confined spaces. Texas Department of Transportation, Austin, Report No.: FHWA/TX-08/0-5506-1
265.
Lee YB, Ko HY, McCartney JS (2010) Deformation response of shored MSE walls under surcharge loading in the centrifuge. Geosynth Int 17:389–402CrossRef
266.
Morrison KF, Harrison FE, Collin JG, Anderson SA (2007) Full-scale testing of a shored mechanically-stabilized earth (SMSE) wall employing short reinforcements. In: Proceedings of Geo-Denver, Colorado, pp 1–10
267.
Morrison KF, Harrison FE, Collin JG, Dodds A, Arndt B (2006) Shored mechanically stabilized earth (SMSE) wall systems design guidelines. Federal Highway Administration, Lakewood, Report No.: FHWA-CFL/TD-06-001
268.
Lawson CR, Yee TW (2005) Reinforced soil retaining walls with constrained reinforced fill zones. In: Proceedings of Geo-Frontiers Congress, Texas, pp 1–14
269.
Xu C, Luo YS, Chen HS, Jia B (2016) Effects of interface connections on narrowed mechanically stabilized earth walls. Environ Earth Sci 75:1–12CrossRef
270.
Joshi C, Shah M, Singh S, Dave S (2020) Experimental study on retaining walls with narrow cohesionless backfill using arching theory. In: Geo-Congress 2020: engineering, monitoring, and management of geotechnical infrastructure. American Society of Civil Engineers, Reston, pp 560–568
271.
Rajeev R, Pranav PRT, Heeralal M (2014) A numerical study on the influence of surcharge and modes of wall deformation on earth pressures of narrow retaining walls. In: Proceeding of ICSCI 2014 © ASCE India Section, Hitex, Hyderabad
272.
Kakrasul J, Han J, Rahmaninezhad SM (2018) Laboratory evaluation of deformations of geosynthetic-reinforced retaining walls subjected to footing loading. In: Proceedings of 11th international conference on geosynthetics, Seoul, pp 16–21
273.
Kakrasul JI, Han J, Rahmaninezhad SM, Weldu M (2016) Model tests of geosynthetic-reinforced earth walls with limited-space retained fill. In: Proceedings of 3rd Pan-American conference on geosynthetics, Miami, pp 1279–1276
274.
Kakrasul JI, Han J, Rahmaninezhad SM (2020) Load-deformation of geosynthetic-reinforced retaining walls with limited fill space under static footing loading. Transp Infrastruct Geotechnol 7:309–331CrossRef
275.
Luo Y, Xu C, Wei X (2018) Full-scale tests on high narrowed mechanically stabilized roadbed with wrapped-around geogrid facing. In: Proceedings of GeoShanghai international conference, Singapore, pp 327–337
276.
Tatsuoka F, Tateyama M, Murata O (1989) Earth retaining wall with a short geotextile and a rigid facing. In: Proceedings of 12th International conference on soil mechanics and foundation engineering, Rio de Janeiro, pp 1311–1314
277.
Woodruff R (2003) Centrifuge modelling for MSE-shoring composite walls. Dissertation, University of Colorado, Boulder
278.
Yang KH, Gupta R, Zornberg JG (2009) Location of failure plane within narrow GRS wall systems. In: Proceedings of geosynthetics, Utah, pp 1–11
279.
Yang KH, Zornberg JG, Hung WY, Lawson CR (2011) Location of failure plane and design considerations for narrow GRS wall. J GeoEngin 6:13–26
280.
Yang KH, Zornberg JG, Wright SG (2008) Numerical modelling of narrow MSE walls with extensible reinforcements. Texas Department of Transportation, Austin, Report No.: FHWA/TX-08/0-5506-2
281.
Sadat MR, Huang J, Bin-Shafique S, Rezaeimalek S (2018) Study of the behavior of mechanically stabilized earth (MSE) walls subjected to differential settlements. Geotext Geomembr 46:77–90CrossRef
282.
Shinde AL, Mandal JN (2007) Behaviour of reinforced soil retaining wall with limited fill zone. Geotech Geol Eng 25:657–672CrossRef
283.
Chou NNS, Fan CC (2005) Structure for fastening soil nails to reinforced soil retaining walls. US Patent No.: 6,742,967 B1
Metadaten
Titel
Stability and Serviceability Assessment of Reinforced Earth Retaining Structures: A State-of-the-Art and Way Forward
verfasst von
Vairamani Sundaravel
Bollor Shoorappa Gowda Deviprasad
Ramanandan Saseendran
Goudappa Ramanagouda Dodagoudar
Publikationsdatum
01.06.2023
Verlag
Springer International Publishing
Erschienen in
International Journal of Geosynthetics and Ground Engineering / Ausgabe 3/2023
Print ISSN: 2199-9260
Elektronische ISSN: 2199-9279
DOI
https://doi.org/10.1007/s40891-023-00453-y

Weitere Artikel der Ausgabe 3/2023

International Journal of Geosynthetics and Ground Engineering 3/2023 Zur Ausgabe

Technical Note

Behavior of Two-Tiered MSE Walls Under Static and Seismic Loading

Original Paper

Mechanical Properties of Unsaturated Expansive Soils Treated with Eco-Friendly Sodium Alginate Biopolymer

Original Paper

Soil Water Characteristic Curves of Soils Exhibiting Different Plasticity

Original Paper

Dynamic Stability Analysis of Slope Under the Impact Load of Large Diameter Punched Cast-in-Place Pile

Original Paper

Seismic Internal Stability Analysis of Modular Block Reinforced Earth Retaining Wall

Original Paper

Understanding the Engineering Behaviour of Expansive Soil Amended with Bagasse Ash and Lime Using Microstructural Analysis