nach oben

Journal of Materials Engineering and Performance

27.03.2024 | Original Research Article

Surface Modification of Activated Carbon Fibers for the Adsorption Capture of Carbon Dioxide in Flue Gas

verfasst von: Jinchang Liu, Ling Xiang, Tong Wang

Erschienen in: Journal of Materials Engineering and Performance

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Tetraethylenepentamine (TEPA) and K₂CO₃ were utilized as modifiers to optimize the surface properties of ACFs and enhance their CO₂ adsorption performance. The results show that the TEPA modification leads to an increase in the nitrogen content, while the K₂CO₃ modification enhances the proportion of oxygen elements in ACFs. Both unmodified and modified ACFs predominantly consist of carbon elements, accounting for over 80 wt.% of the total composition. TEPA modification can improve both the adsorption capacity and adsorption rate of CO₂, while K₂CO₃ modification only enhances the adsorption capacity. The modification using 4 wt.% exhibits an excellent CO₂ adsorption capacity of 27.6 mL/g, while the modification using 0.8 mol/L K₂CO₃ demonstrates a good CO₂ adsorption capacity of 28.1 mL/g. The simulation study reveals that the modified ACFs are more likely to bind with CO₂ molecules compared to unmodified ACFs, whereas TEPA-modified ACFs have almost the same CO₂ adsorption performance as K₂CO₃-modified ACFs.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

O. Olumayegun, M. Wang, and E. Oko, Thermodynamic Performance Evaluation of Supercritical CO₂ Closed Brayton Cycles for Coal-Fired Power Generation with Solvent-Based CO₂ Capture, Energy, 2019, 168, p 1074–1088. https://doi.org/10.1016/j.energy.2018.10.127CrossRef

S.Y. Liu, H.Y. Li, K. Zhang et al., Techno-economic Analysis of Using Carbon Capture and Storage (CCS) in Decarbonizing China’s Coal-Fired Power Plants, J. Clean. Prod., 2022, 351, p 131384–131397. https://doi.org/10.1016/j.jclepro.2022.131384CrossRef

S.Y. Oh, S. Yun, and J.K. Kim, Process Integration and Design for Maximizing Energy Efficiency of a Coal-Fired Power Plant Integrated with Amine-Based CO₂ Capture Process, Appl. Energy, 2018, 216, p 311–322. https://doi.org/10.1016/j.apenergy.2018.02.100CrossRef

H.B. Zhai, Y. Ou, and E.S. Rubin, Opportunities for Decarbonizing Existing US Coal-Fired Power Plants via CO₂ Capture, Utilization and Storage, Environ. Sci. Technol., 2015, 49, p 7571–7579. https://doi.org/10.1021/acs.est.5b01120CrossRefPubMed

R. Zhang, X.W. He, T.Z. Liu et al., Thermodynamic Studies for Improving the Prediction of CO₂ Equilibrium Solubility in Aqueous 2-Dimethylamino-2-Methyl-1-Propanol, Sep. Purif. Technol., 2022, 295, p 121292–121302. https://doi.org/10.1016/j.seppur.2022.121292CrossRef

X.S. Li, J. Liu, W.F. Jiang et al., Low Energy-Consuming CO₂ Capture by Phase Change Absorbents of Amine/alcohol/H₂O, Sep. Purif. Technol., 2021, 275, p 119181–119188. https://doi.org/10.1016/j.seppur.2021.119181CrossRef

I. Hossain, A.A. Munsur, O. Choi et al., Bisimidazolium PEG-Mediated Crosslinked 6FDA-Durene Polyimide Membranes for CO₂ Separation, Sep. Purif. Technol., 2019, 224, p 180–188. https://doi.org/10.1016/j.seppur.2019.05.014CrossRef

Q.H. Li, H.Y. Wu, Z. Wang et al., Analysis and Optimal Design of Membrane Processes for Flue gas CO₂ Capture, Sep. Purif. Technol., 2022, 298, p 121584–121596. https://doi.org/10.1016/j.seppur.2022.121584CrossRef

M. Khuram, A. Abulhassan, N. Rizwan et al., Experimental and Simulation Study on High-Pressure V-L-S Cryogenic Hybrid Network for CO₂ Capture from Highly Sour Natural Gas, Process Saf. Environ., 2021, 150, p 36–50. https://doi.org/10.1016/j.psep.2021.03.051CrossRef

10.

M. Khuram, M. Aditi, A. Abulhassan et al., Cryogenic Carbon Dioxide Separation from Natural Gas: A Review Based on Conventional and Novel Emerging Technologies, Rev. Chem. Eng., 2014, 30, p 453–477. https://doi.org/10.1515/revce-2014-0009CrossRef

11.

J. Bai, J. Shao, M. Demir et al., Sulfur-Doped Porous Carbon Adsorbent—A Promising Solution for Effective and Selective CO₂ Capture, Chem. Eng. J., 2024, 479, p 147667–147674. https://doi.org/10.1016/j.cej.2023.147667CrossRef

12.

J.C. Liu, Y.P. Li, X.Y. An et al., Activated Carbon Fiber Derived from Wasted Coal Liquefaction Residual for CO₂ Capture, Environ. Res., 2022, 215, p 114197–114206. https://doi.org/10.1016/j.envres.2022.114197CrossRefPubMed

13.

G. Dura, V.L. Budarin, J.A. Castro-Osma et al., Importance of Micropore-Mesopore Interfaces in Carbon Dioxide Capture by Carbon-Based Materials, Angew. Chem. Int. Edit., 2016, 55, p 9173–9177. https://doi.org/10.1002/anie.201602226CrossRef

14.

J. Bai, J. Huang, Q. Jiang et al., Synthesis and Characterization of Polyphenylene Sulfide Resin-Derived S-Doped Porous Carbons for Efficient CO₂ Capture, Colloid Surface A, 2023, 674, p 13916–13924. https://doi.org/10.1016/j.colsurfa.2023.131916CrossRef

15.

W.H. Su, R. Wang, and T.S. Zhao, CO₂-Imprinted Sustainable Carbon Derived from Sunflower Heads for Highly Effective Capture of CO₂ from Flue Gas, Aerosol, Air Qual. Res., 2020, 20, p 180–192. https://doi.org/10.4209/aaqr.2019.10.0538CrossRef

16.

Y.N. Gong, Y.L. Huang, L. Jiang et al., A Luminescent Microporous Metal Organic Framework with Highly Selective CO₂ Adsorption and Sensing of Nitro Explosives, Inorg. Chem., 2014, 53, p 9457–9459. https://doi.org/10.1021/ic501413rCrossRefPubMed

17.

G.R. Si, X.J. Kong, T. He et al., A Stable Co(II)-Based Metal-Organic Framework with Dual-Functional Pyrazolate-Carboxylate Ligand: Construction and CO₂ Selective Adsorption and Fixation, Chin. Chem. Lett., 2021, 32, p 918–922. https://doi.org/10.1016/j.cclet.2020.07.023CrossRef

18.

F. Luo, P.P. Meng, X.F. Feng et al., A Complex Self-Catenated Coordination Framework with a Rare (3,12)-Connected Underlying Net Showing Selective Adsorption of CO₂, Eur. J. Inorg. Chem., 2015, 28, p 4633–4637. https://doi.org/10.1002/ejic.201500715CrossRef

19.

X.H. Xiong, L. Zhang, W. Wang et al., Nitro-Decorated Microporous Covalent Organic Framework (TpPa-NO₂) for Selective Separation of C₂H₄ from a C₂H₂/C₂H₄/CO₂ Mixtureand CO₂ Capture, ACS Appl. Mater. Interfaces, 2022 https://doi.org/10.1021/acsami.2c08338CrossRefPubMedPubMedCentral

20.

H. Wei, S.Z. Chai, N.T. Hu et al., The Microwave-Assisted Solvothermal Synthesis of a Crystalline Two-Dimensional Covalent Organic Framework with High CO₂ Capacity, Chem. Commun., 2015, 51, p 12178–12181. https://doi.org/10.1039/c5cc04680gCrossRef

21.

Y. Jiao, Y. Zheng, and S.C. Smith, Electrocatalytically Switchable CO₂ Capture: First Principle Computational Exploration of Carbon Nanotubes with Pyridinic Nitrogen, Chemsuschem, 2014, 7, p 435–441. https://doi.org/10.1002/cssc.201300624CrossRefPubMed

22.

Y.P. Zeng, K. Li, Q.Y. Zhu et al., Capture of CO₂ in Carbon Nanotube Bundles Supported with Room-Temperature Ionic Liquids: A Molecular Simulation Study, Chem. Eng. Sci., 2018, 192, p 94–102. https://doi.org/10.1016/j.ces.2018.07.025CrossRef

23.

M. Miyamoto, Y. Fujiokax, and K. Yogo, Pure Silica CHA Type Zeolite for CO₂ Separation Using Pressure Swing Adsorption at High Pressure, J. Mater. Chem., 2012, 22, p 20186–20189. https://doi.org/10.1039/c2jm34597hCrossRef

24.

J. Bai, J. Shao, Q. Yu et al., Sulfur-Doped Porous Carbon Adsorbent: A Promising Solution for Effective and Selective CO₂ Capture, Chem. Eng. J., 2024, 479, p 147667–147676. https://doi.org/10.1016/j.cej.2023.147667CrossRef

25.

Z.N. Song, Q.B. Dong, W.W.L. Xu et al., Molecular Layer Deposition-Modified 5A Zeolite for Highly Efficient CO₂ Capture, ACS Appl. Mater. Interfaces, 2018, 10, p 769–775. https://doi.org/10.1021/acsami.7b16574CrossRefPubMed

26.

R.A. Fiuza, R.M.D. Neto, B. Correia et al., Preparation of Granular Activated Carbons from Yellow Mombin Fruit Stones for CO₂ Adsorption, J. Environ. Manag., 2015, 161, p 198–205. https://doi.org/10.1016/j.jenvman.2015.06.053CrossRef

27.

S.J. Li, M.K. Cho, X.Z. Yuan et al., Cyclic Performance Evaluation of CO₂ Adsorption Using Polyethylene Terephthalate Plastic-Waste-Derived Activated Carbon, Fuel, 2022, 331, p 125599–125611. https://doi.org/10.1016/j.fuel.2022.125599CrossRef

28.

H. An, B. Feng, and S. Su, CO₂ Capture by Electrothermal Swing Adsorption with Activated Carbon Fibre Materials, Int. J. Greenh. Gas Con., 2011, 5, p 16–25. https://doi.org/10.1016/j.ijggc.2010.03.007CrossRef

29.

J. Choma, L. Osuchowski, and M. Marszewski, Developing Microporosity in Kevlar (R)-Derived Carbon Fibers by CO₂ Activation for CO₂ Adsorption, J. CO2 Util., 2016, 16, p 17–22. https://doi.org/10.1016/j.jcou.2016.05.004CrossRef

30.

N. Diez, P. Alvarez, M. Granda et al., CO₂ Adsorption Capacity and Kinetics in Nitrogen-Enriched Activated Carbon Fibers Prepared by Different Methods, Chem. Eng. J., 2015, 281, p 704–712. https://doi.org/10.1016/j.cej.2015.06.126CrossRef

31.

B.C. Bai, E.A. Kim, C.W. Lee et al., Effects of Surface Chemical Properties of Activated Carbon Fibers Modified by Liquid Oxidation for CO₂ Adsorption, Appl. Surf. Sci., 2015, 353, p 158–164. https://doi.org/10.1016/j.apsusc.2015.06.046CrossRef

32.

W.Z. Shen, S.C. Zhang, Y. He et al., Hierarchical Porous Polyacrylonitrile-Based Activated Carbon Fibers for CO₂ Capture, J. Mater. Chem., 2011, 21, p 14036–14040. https://doi.org/10.1039/c1jm12585kCrossRef

33.

L. Li, X.F. Wang, J.J. Zhong et al., Nitrogen-Enriched Porous Polyacrylonitrile-Based Carbon Fibers for CO₂ Capture, Ind. Eng. Chem. Res., 2018, 57, p 11608–11616. https://doi.org/10.1021/acs.iecr.8b01836CrossRef

34.

J. Bai, J. Huang, M. Demir et al., N-Doped Porous Carbon Derived from Macadamia Nut Shell for CO₂ Adsorption, Fuel Process. Technol., 2023, 249, p 107854–107862. https://doi.org/10.1016/j.fuproc.2023.107854CrossRef

35.

M.S. Shafeeyan, W.M.A.W. Daud, A. Houshmand et al., A Review on Surface Modification of Activated Carbon for Carbon Dioxide Adsorption, J. Anal. Appl. Pyrol., 2010, 89, p 143–151. https://doi.org/10.1016/j.jaap.2010.07.006CrossRef

36.

W.M.A.W. Daud and A. Houshmand, Textural Characteristics, Surface Chemistry and Oxidation of Activated Carbon, J. Nat. Gas Chem., 2010, 19, p 267–279. https://doi.org/10.1016/S1003-9953(09)60066-9CrossRef

37.

D. Liu, Q. Xie, X. Huang et al., Backwashing Behavior and Hydrodynamic Performances of Granular Activated Carbon Blends, Environ. Res., 2020, 184, p 109302–109311. https://doi.org/10.1016/j.envres.2020.109302CrossRefPubMed

38.

C. Wan, Q. Xie, J. Liu et al., Pilot-Scale Combined Adsorption Columns Using Activated Carbon and Zeolite for Hazardous Trace Elements Removal from Wastewater of Entrained-Flow Coal Gasification, Process Saf. Environ., 2021, 147, p 439–449. https://doi.org/10.1016/j.psep.2020.09.053CrossRef

39.

H. Sugiyama and H. Yoshiyuki, Selective and Enhanced CO₂ Adsorption on Fluorinated Activated Carbon Fibers, Chem. Phys. Lett., 2020, 758, p 137909–137914. https://doi.org/10.1016/j.cplett.2020.137909CrossRef

40.

Z.C. Wang, Q. Wang, and R.N. Hu, Effect of Thermal Extraction on Hydro-Liquefaction Property of Residual Coal, Fuel, 2019, 251, p 474–481. https://doi.org/10.1016/j.fuel.2019.04.063CrossRef

41.

N. Ayawei, A.N. Ebelegi, and D. Wankasi, Modelling and Interpretation of Adsorption Isotherms, J. Chem., 2017, 2017, p 1–11. https://doi.org/10.1155/2017/3039817CrossRef

42.

S.V. Mohan, N. Chandrasekhar, and J. Karthikeyan, Adsorptive Removal of Direct Azo Dye from Aqueous Phase Onto Coal Based Sorbents: A Kinetic and Mechanistic Study, J. Hazard. Mater., 2002, 90, p 189–204. https://doi.org/10.1016/S0304-3894(01)00348-XCrossRef

43.

L. Gong, J. Chen, and Y. Mu, Catalytic CO₂ Reduction to Valuable Chemicals Using NiFe-Based Nanoclusters: A First-Principles Theoretical Evaluation, Phys. Chem. Chem. Phys., 2017, 19, p 28344–28353. https://doi.org/10.1039/c7cp06155bCrossRefPubMed

Titel: Surface Modification of Activated Carbon Fibers for the Adsorption Capture of Carbon Dioxide in Flue Gas
verfasst von: Jinchang Liu
Ling Xiang
Tong Wang
Publikationsdatum: 27.03.2024
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-024-09397-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht