nach oben

Forschung im Ingenieurwesen

Erschienen in:

26.06.2023 | Originalarbeiten/Originals

Advances in simulations of displacements and stresses in light-weight gears

verfasst von: B. Guilbert, D. Dureisseix, P. Velex

Erschienen in: Forschung im Ingenieurwesen | Ausgabe 3/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The main objective of this paper is to analyse the dynamic behaviour of thin -rimmed/-webbed gears. A hybrid model is presented, which can capture the instant contact conditions between the teeth as well as the global dynamic behaviour of transmissions including the internal displacements and stresses in gear bodies. Finite elements are combined with condensed sub-structures, lumped parameter elements along with mortar-based mesh interfaces to connect non-compatible models. The results show that gear body dynamic displacements and stresses in thin-rimmed/-webbed gears are stationary in the fixed coordinate system attached to the meshing and relatively decoupled from the dynamic mesh forces. From a numerical viewpoint, it is found that numerical convergence on gear body stresses at high speeds requires significant computational times, thus highlighting the interest of lighter hybrid gear models as opposed to full finite element simulations.

Vorheriger Artikel Measuring instantaneous angular speed using a gear wheel as material measure to detect pitting damage during an endurance test

Nächster Artikel Einsatzverhalten und Verschleiß von PVD-beschichteten und fluid-frei geschmierten Zahnrädern

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Özgüven HN, Houser DR (1988) Mathematical models used in gear dynamics—a review. J Sound Vib 121(3):383–411. https://doi.org/10.1016/S0022-460X(88)80365-1CrossRef

Kahraman A, Singh R (1990) Non-linear dynamics of a spur gear pair. J Sound Vib 142(1):49–75. https://doi.org/10.1016/0022-460X(90)90582-KCrossRef

Özgüven HN (1991) A non-linear mathematical model for dynamic analysis of spur gears including shaft and bearing dynamics. J Sound Vib 145(2):239–260. https://doi.org/10.1016/0022-460X(91)90590-GCrossRef

Karhaman K (1993) Effect of axial vibration on the dynamics of a helical gear pair. J Vib Acoust 115:33–39. https://doi.org/10.1115/1.2930311CrossRef

Velex P, Maatar M (1996) A mathematical model for analysing the influence of shape deviation and mounting errors on gear behaviour. J Sound Vib 191:629–660. https://doi.org/10.1006/jsvi.1996.0148CrossRef

Baud S, Velex P (2002) Static and dynamic tooth loading in spur and helical geared systems-experiments and model validation. J Mech Des 124(2):334–346. https://doi.org/10.1115/1.1462044CrossRef

Vedmar L, Andersson A (2003) A method to determine dynamic loads on spur gear teeth and on bearings. J Sound Vib 267:1065–1084. https://doi.org/10.1016/S0022-460X(03)00358-4CrossRef

Kubur M, Kahraman A, Zini DM et al (2004) Dynamic analysis of a multi-shaft helical gear transmission by finite elements: model and experiment. J Vib Acoust 126:398–406. https://doi.org/10.1115/1.1760561CrossRef

Noga S (2009) Transverse vibration of a gear wheel. Sci Bull Ser C 23:137–142

10.

Li S (2002) Deformation and bending stress analysis of a three-dimensional, thin-rimmed gear. J Mech Des 124:129–135. https://doi.org/10.1115/1.1427928CrossRef

11.

Li S (2002) Gear contact model and loaded tooth contact analysis of a three-dimensional thin-rimmed gear. J Mech Des 124:511–517. https://doi.org/10.1115/1.1485290CrossRef

12.

Li S (2006) Finite element analyses for contact strength and bending strength for a pair of spur gears with machining errors, assembly errors and tooth modifications. Mech Mach Theory 42:88–114. https://doi.org/10.1016/j.mechmachtheory.2006.01.009CrossRefMATH

13.

Li S (2008) Centrifugal load and its effects on bending strength and contact strength of high speed thin-walled spur gear with offset web. Mech Mach Theory 43:217–239. https://doi.org/10.1016/j.mechmachtheory.2007.01.006CrossRefMATH

14.

Li S (2013) Effects of centrifugal load on tooth contact stresses and bending stresses of thin-rimmed spurs gears and with inclined webs. Mech Mach Theory 59:34–47. https://doi.org/10.1016/j.mechmachtheory.2012.08.011CrossRef

15.

Li S (2008) Experimental investigation and FEM analysis of resonance frequency behaviour of three-dimensional, thin-walled spur gears with power-circulating test rig. Mech Mach Theory 43:934–963. https://doi.org/10.1016/j.mechmachtheory.2007.07.009CrossRefMATH

16.

Abousleiman V, Velex P (2006) A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analysis of planetary/epicyclic gear sets. Mech Mach Theory 41:725–748. https://doi.org/10.1016/j.mechmachtheory.2005.09.005CrossRefMATH

17.

Abousleiman V, Velex P, Becquerelle S (2007) Modelling of spur and helical gear planetary drives with flexible gears and planet carriers. J Mech Des 129(1):95–106CrossRef

18.

Kahraman A, Ligata H, Singh A (2010) Influence of ring gear rim thickness on planetary gear set behavior. J Mech Des 132:21002CrossRef

19.

Hu Y, Talbot D, Kahraman A (2019) A gear load distribution model for a planetary gear set with a flexible ring gear having external splines. J Mech Des 141:53301. https://doi.org/10.1115/1.4041583CrossRef

20.

Ericson TM, Parker RG (2021) Experimental measurement and finite element simulation of elastic-body vibration in planetary gears. Mech Mach Theory 160:104264. https://doi.org/10.1016/j.mechmachtheory.2021.104264CrossRef

21.

Parker RG, Sathe PJ (1999) Exact Solution for the free and forced vibration of a rotating disk-spindle system. J Sound Vib 223(3):445–465. https://doi.org/10.1006/jsvi.1998.2097CrossRef

22.

Parker RG, Sathe PJ (1999) Free vibration and stability of a spinning disk-spindle system. J Vib Acoust 121:391–396. https://doi.org/10.1115/1.2893992CrossRef

23.

Cooley CG, Parker RG (2014) Vibration of high-speed rotating rings coupled to space-fixed stiffnesses. J Sound Vib 333:2631–2648. https://doi.org/10.1016/j.jsv.2014.01.005CrossRef

24.

Bettaieb M, Velex P, Ajmi M (2007) A static and dynamic model of geared transmission by combining substructures and elastic foundations—application on thin-rimmed gears. J Mech Des 129:184–194. https://doi.org/10.1115/1.2406088CrossRef

25.

Ziegler P, Eberhard P, Schweizer B (2006) Simulation of impacts in gear trains using different approaches. Arch Appl Mech 76:537–548. https://doi.org/10.1007/s00419-006-0060-6CrossRefMATH

26.

Virlez G, Brüls O, Sonneville V et al (2013) Contact model between superelements in dynamic multibody systems https://doi.org/10.1115/DETC2013-13469CrossRef

27.

Virlez G, Brüls O, Tromme E et al (2014) Dynamic simulation of flexible gear pairs using contact modelling between superelements

28.

Guilbert B, Velex P, Dureisseix D et al (2016) A mortar-based mesh interface for hybrid finite element/lumped parameter gear dynamic models—applications to thin-rimmed geared systems. J Mech Des 138(12):123301. https://doi.org/10.1115/1.4034220CrossRef

29.

Guilbert B, Velex P, Dureisseix D et al (2019) Modular hybrid models to simulate the static and dynamic behavior of high-speed thin-rimmed gears. J Sound Vib 438:353–380. https://doi.org/10.1016/j.jsv.2018.09.003CrossRef

30.

Herting DN (1985) A general purpose, multi-stage component modal synthesis method. Finite Elem Anal Des 1:153–164. https://doi.org/10.1016/0168-874X(85)90025-3CrossRefMATH

31.

Guilbert B, Velex P, Cutuli P (2019) Quasi-static and dynamic analyses of thin-webbed high-speed gears: centrifugal effect influence. J Proc Inst Mech Eng. https://doi.org/10.1177/0954406219855411CrossRef

32.

Guilbert B, Cutuli P, Velex P (2019) Hybrid models for the study if gear body dynamic deflections—modes of the gear body, pp 823–834

33.

Blockmans B, Tamarozzi T, Naets F et al (2015) A nonlinear parametric model reduction method for efficient gear contact simulation. Int J Numer Meth Engng 102:1162–1191. https://doi.org/10.1002/nme.4831MathSciNetCrossRefMATH

34.

Tamarozzi T, Blockmans B, Desmet W (2018) Dynamic stress analysis of the high-speed stage of a wind turbine gearbox using a coupled flexible multibody approach. BoD-Books on Demand, p 87

35.

Shweiki S, Palermo A, Mundo D (2017) A study on the dynamic behaviour of lightweight gears https://doi.org/10.1155/2017/7982170CrossRef

36.

Shweiki S, Rezayat A, Tamarozzi T et al (2019) Transmission error and strain analysis of lightweight gears by using a hybrid FE-analytical gear contact model. Mech Syst Signal Process 123:573–590. https://doi.org/10.1016/j.ymssp.2019.01.024CrossRef

37.

Schurr D, Holzwarth P, Eberhard P (2018) Investigation of dynamic stress recovery in elastic gear simulations using different reduction techniques. Comput Mech 62:439–456. https://doi.org/10.1007/s00466-017-1507-zMathSciNetCrossRefMATH

38.

Kazaz L, Pfister C, Ziegler P et al (2020) Transient gear contact simulations using a floating frame of reference approach and higher-order ansatz functions. Acta Mech 231:1337–1350. https://doi.org/10.1007/s00707-019-02584-8MathSciNetCrossRefMATH

39.

Weber C, Banaschek K (1953) Formänderung und Profilrücknahme bei Gerad-und Schrägverzahnten Antriebstechnik. Vieweg, Braunschweig, p 11

40.

Géradin M, Rixen DJ (2015) Mechanical vibrations: theory and application to structural dynamics, 3rd edn. Wiley

41.

Ankouni M, Lubrecht AA, Velex PP (2014) Numerical simulation of damping in EHL line contacts. International Gear Conference, Lyon, 26–28 August 2014, pp 1020–1028 (paper no. 2)

42.

Ankouni M (2016) Modeling of damping in elastohydrodynamic lubricated contact, application to gear dynamics. INSA, Lyon (PhD Thesis)

43.

Umezawa K, Suzuki T, Houjoh H et al (1985) Vibration of power transmission helical gears: (the effect of contact ratio on the vibration). Bull JSME 28(238):694–700CrossRef

44.

Belhaneche H (1988) Contribution à l’étude du comportement statique et vibratoire des engrenages à axes parallèles à denture droite par speckle et holographie. INSA, Lyon (PhD Thesis)

45.

Mounetou A, Talon A, Colette C (2014) Non-intrusive measurement of gear dynamic response. International gear conference, Lyon, 26th–28th August 2014. vol 2, pp 1029–1037

46.

Schmiechen P (1997) Travelling wave speed coincidence. University of London (PhD Thesis)

47.

Püst L, Pesek L (2009) Travelling waves in rotational machines. Engineering mechanics 2009, National Conference with international participation, Svratka, 11–14 May 2009, pp 1065–1078

Titel: Advances in simulations of displacements and stresses in light-weight gears
verfasst von: B. Guilbert
D. Dureisseix
P. Velex
Publikationsdatum: 26.06.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: Forschung im Ingenieurwesen / Ausgabe 3/2023
Print ISSN: 0015-7899
Elektronische ISSN: 1434-0860
DOI: https://doi.org/10.1007/s10010-023-00680-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2023

Investigation of sound and vibration behavior of cylindrical gears

Review of different calculation approaches for the mean coefficient of friction in ISO 6336

Transferability of the scuffing load capacity of gear oils determined on spur gears to hypoid gears

Erratum to: Transient thermal model of a planetary gear set based on a uniform temperature approach

Cross-correlation analysis among tooth profile and helix deviations

A non-restrictive approach of gear geometry calculation for plastic gears

Premium Partner

Marktübersichten