Ausgabe 3/2023
Best of Gears 2023
Inhalt (36 Artikel)
Binder jetting in gears
Lukas Klee, Thomas Bergs, Mareike Solf, Jens Brimmers
Investigating different nodular graphite irons for the application of gears—a step towards standardization by using reasonable quality criteria
Jochen Lohmiller, Florian Dobler, Markus Wöppermann
Parameter based definition of eccentric cycloid gearings
Stefan Landler, Maximilian Trübswetter, Michael Otto, Karsten Stahl
Simulation Study on the Tribological Characteristics in the Meshing Contact in the Context of the Load Carrying Capacity Calculation of Internal Gears with Unbalanced Sliding Conditions
Michael Geitner, Sebastian Preintner, Thomas Tobie, Karsten Stahl
Analytical method for calculating the nominal tooth root stress in worm gear shafts
Johannes Gründer, Alexander Monz
Measuring instantaneous angular speed using a gear wheel as material measure to detect pitting damage during an endurance test
Yanik Koch, Julian Hirschmann, Eckhard Kirchner
Advances in simulations of displacements and stresses in light-weight gears
B. Guilbert, D. Dureisseix, P. Velex
Einsatzverhalten und Verschleiß von PVD-beschichteten und fluid-frei geschmierten Zahnrädern
Sebastian Sklenak, Dieter Mevissen, Jens Brimmers, Christian Brecher, Bastian Lenz, Andreas Mehner
Experimental verification of high-performance polymer gears in an electric vehicle powertrain
S. Reitschuster, T. Tobie, K. Stahl
Analysis of the tip interference in low gear ratio internal spur gears with profile modification
José I. Pedrero, Miguel Pleguezuelos, Miryam B. Sánchez
Meshing limit line of Niemann face wormgear drive
Jian Cui, Yaping Zhao, Shibo Mu, Qingxiang Meng, Gongfa Li
Acoustical behavior of periodic flank modifications under dynamic operating conditions
Sebastian Sepp, Alois Wenig, Michael Otto, Karsten Stahl
Transferability of the scuffing load capacity of gear oils determined on spur gears to hypoid gears
Alexander Drechsel, Josef Pellkofer, Karsten Stahl
Exploration of trade-offs between NVH and efficiency in bevel gear design
Eugeniu Grabovic, Alessio Artoni, Marco Gabiccini, Enrico Ciulli
Crossed helical gears—simulative studies and experimental results on non-involute geometries
Linda Becker, Peter Tenberge
Calculation method for wear of steel-bronze rolling-sliding contacts relating to worm gears
Philipp E. Schnetzer, Josef Pellkofer, Karsten Stahl
Comparing the contact characteristics of involute gear/eccentric cycloidal gear calculated by various loaded tooth contact analysis models
Ling-Chiao Chang, Jonas-Frederick Hochrein, Qi-You Zhuang, Stefan Landler, Shyi-Jeng Tsai, Michael Otto, Karsten Stahl
Applicability of classic analytical calculation approaches for the design of plastic gears
Markus Rothemund, Michael Otto, Karsten Stahl
Gear skiving with minimum twist errors
Andreas Hilligardt, Volker Schulze
Cross-correlation analysis among tooth profile and helix deviations
Daisuke Yamazaki, Daisuke Iba, Jing Chong Low, Ichiro Moriwaki
Investigation of sound and vibration behavior of cylindrical gears
A. Beinstingel, F. Haringer, W. Sigmund, M. Heider, B. Pinnekamp, S. Marburg
On the reduction of windage power losses in gears by the modification of tooth geometry
M. Ruzek, R. Brun, Y. Marchesse, F. Ville, P. Velex
Design and analysis of compound stepped planetary gear drives for better transmission performances
Shyi-Jeng Tsai, Qi-You Zhuang
Crack growth based tooth root life prediction model—an influence quantity analysis
Johannes Lövenich, Moritz Zalfen, Dieter Mevissen, Jens Brimmers, Christian Brecher
A concept for comparison of new and aged lubricants in transmissions of electric vehicles and a method of oil aging on a test rig
Timo König, Luca Cadau, Lukas Steidle, Didem Cansu Güney, Joachim Albrecht, Katharina Weber, Markus Kley
Improvement of the transmission efficiency in electric vehicles by using double staggered helical gears with shortened teeth
Ignacio Gonzalez-Perez, Alfonso Fuentes-Aznar
A non-restrictive approach of gear geometry calculation for plastic gears
Florian Eigner, Stephan Oberle, Maik Berger
Influence of axis misalignments in stepped planetary gear stages on the excitation behavior—test rig development and simulative analysis
Christian Westphal, Jens Brimmers, Christian Brecher
Transient thermal model of a planetary gear set based on a uniform temperature approach
Wassim Ramdane, Christophe Changenet, Souhil Seghir-Ouali, Cyril Chevrel-Fraux, Pierre Casanova
Experimental investigation of moving contact pattern in helical planetary gearboxes
Marius Fürst, Sebastian Sepp, Daniel Schweigert, Michael Otto, Karsten Stahl
Testing and modelling of a 2.5 MW wind turbine gearbox: Influence of lubricant formulation
Carlos M. C. G. Fernandes, Rui Ferreira, Jorge H. O. Seabra, João M. Cruz, Ricardo Bernardes
Investigation of friction and scuffing during loss of lubrication on a high velocity twin-disc test rig
Ulrike Cihak-Bayr, Thomas Wopelka, Christoph Wintersteiger
Review of different calculation approaches for the mean coefficient of friction in ISO 6336
Niklas Blech, Constantin Paschold, Luc Amar, Thomas Lohner, Thomas Tobie, Karsten Stahl
Latest advancements in the lubricant simulations of geared systems: a technology ready for industrial applications
Franco Concli, Marco N. Mastrone
Erratum to: Transient thermal model of a planetary gear set based on a uniform temperature approach
Wassim Ramdane, Christophe Changenet, Souhil Seghir-Ouali, Cyril Chevrel-Fraux, Pierre Casanova