nach oben

Forschung im Ingenieurwesen

Erschienen in:

01.12.2024 | Originalarbeiten/Originals

Modeling and analysis of the synchronization process of synchronizer

verfasst von: Panming Chen, Hua Ding, Jingyan Zhao

Erschienen in: Forschung im Ingenieurwesen | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In order to improve the accuracy of shift control, the relationship between dynamic friction process of synchronizer and structural parameters, working condition parameters is studied. Through the theoretical analysis of synchronizer synchronization process, the mathematical model of dynamic synchronization process is established, and the validity is verified by tests. The effects of half-cone angle of synchronous ring, minimum inner diameter of synchronous ring, axial length of synchronous ring, lubricating oil viscosity, shift force and rotational speed difference on synchronization performance are analyzed. The results show that half-cone angle, minimum inner diameter and shift force have great influence on torque and synchronization time. Choosing appropriate half-cone angle, minimum inner diameter and shift force can effectively improve the total friction torque and reduce the synchronization time. Axial length and lubricating oil viscosity have great influence on viscous torque and synchronization time. The increase of axial length and oil viscosity will increase the viscous torque, but the synchronization time will also increase. Rotational speed difference only affects synchronization time. The synchronization time increases with the increase of rotational speed difference.

Vorheriger Artikel Untersuchung verschiedener Vergleichsspannungshypothesen im Kontext der Dauerfestigkeit einsatzgehärteter Wellen

Nächster Artikel On the influence of local deformation on structural dynamic models of bolted lap joints

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Stockinger U, Schneider T, Pflaum H, Stahl K (2020) Single vs. multi-cone synchronizers with carbon friction lining—a comparison of load limits and deterioration behavior. Forsch Ingenieurwes 84(3):245–253. https://doi.org/10.1007/s10010-020-00406-1CrossRef

Brown G, Walker G M, Friend C et al (2012) Understanding MTF Additive Effects on Synchroniser Friction. SAE International Journal of Fuels and Lubricants 5(1): 447–458. http://www.jstor.org/stable/26272901

Smith O, Gelder A, Durham J et al (2008) Simulating Synchroniser Stick-Slip Behaviour for Superior Gearbox. Performance Int Joint Tribol Conf (vol 43369:221–223. https://doi.org/10.1115/IJTC2008-71111CrossRef

Wanli X, Wei Z, Bin S et al (2015) Investigation of manual transmission synchronizer failure mechanism induced by interface material/lubricant combinations. Wear 328:475–479. https://doi.org/10.1016/j.wear.2015.03.024CrossRef

Sigl LS, Rau G, Höhn BR, Pflaum H (2003) Processing and performance of PM synchronizer rings with friction linings. Valência. sn

Gao H, Xue S, Ren Y, Peng Y, Zheng L (2023) Failure Analysis of a Brass Synchronizer Ring in the Gearbox of Vehicle. Int J Automot Technol 24(2):493–501. https://doi.org/10.1007/s12239-023-0041-6CrossRef

Yan H, Xu Z, Yuan J, Liu L, Tan C, Ge W (2018) Friction characteristics of synchronization process based on tribo-thermodynamics. Adv Mater Sci Eng. https://doi.org/10.1155/2018/8467921CrossRef

Yan H, Xu Z, Yuan J, Liu M, Ge W (2019) Friction coefficient compensation control in synchronizer synchronization process for transmission. Appl Sci 9(15):3096. https://doi.org/10.3390/app9153096CrossRef

Häggström D, Sellgren U, Stenström W, Björklund S (2015) A verified and validated model for simulation-driven design of heavy duty truck synchronizers. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Vol. 57205, p.V010T11A045). American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2015-47318

10.

Häggström D, Nyman P, Sellgren U, Björklund S (2016) Predicting friction in synchronizer systems. Tribol Int 97:89–96. https://doi.org/10.1016/j.triboint.2015.12.038CrossRef

11.

Schneider T, Dietsch M, Voelkel K, Pflaum H, Stahl K (2022) Analysis of the Thermo-Mechanical Behavior of a Multi-Plate Clutch during Transient Operating Conditions Using the FE Method. Lubricants 10(5):76. https://doi.org/10.3390/lubricants10050076CrossRef

12.

Li J, Feng X, Jiang M, Zhang Y, Wan L (2017) Modelling and simulation of synchronization and engagement for self-energizing synchronizer with multibody dynamics. Adv Mech Eng 9(3):1687814017691410. https://doi.org/10.1177/1687814017691410CrossRef

13.

Liu Y C, Tseng C H (2007) Simulation and analysis of synchronisation and engagement on manual transmission gearbox. International journal of vehicle design 43(1–4): 200–220. https://doi.org/10.1504/IJVD.2007.012304

14.

Li X, Zhang W, Li J, Jiang M, Zhang Y (2015) Analysis on synchronizer of manual transmission using finite element analysis (No. 2015-01-1148). SAE Technical Paper. https://doi.org/10.4271/2015-01-1148

15.

Bedmar AP (2013) Synchronization processes and synchronizer mechanisms in manual transmissions. Department of Applied Mechanics, Chalmers University of. Technology

16.

Dowson D (1962) A generalized Reynolds equation for fluid-film lubrication. International Journal of Mechanical Sciences 4(2): 159–170. https://doi.org/10.1016/S0020-7403(62)80038-1

17.

Patir N, Cheng HS (1978) An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic. Lubr Asme J Lubr Tech 100(1):12–17. https://doi.org/10.1115/1.3453103CrossRef

18.

Patir N, Cheng HS (1979) Application of Average Flow Model to Lubrication Between Rough Sliding. Surfaces Asme J Lubr Tech 101(2):220–229. https://doi.org/10.1115/1.3453329CrossRef

19.

Patir N (1978) Effects of Surface Roughness on Partial Film Lubrication Using an Average Flow Model Based on Numerical. SIMULATION (Northwestern University)

20.

Wang QJ, Chung YW (2013) Encyclopedia of tribology. With (3650 Figures and 493 Tables. Springer)

21.

Greenwood JA, Tripp JH (1970) The Contact of Two Nominally Flat Rough Surfaces. Proc Inst Mech Eng 185(1):625–633. https://doi.org/10.1243/PIME_PROC_1970_185_069_02CrossRef

22.

Chang L, Zhang H (2005) A Mathematical Model for Frictional Elastic-Plastic Sphere-on-Flat Contacts at Sliding Incipient. Asme J Appl Mech 74(1):100–106. https://doi.org/10.1115/1.2178838CrossRef

23.

Guo Y X , Bian D, Zhao Y W (2017) An Elastic-plastic Model Considering Frictional Tangential Stress for the Contact of Rough Surfaces. Lubrication Engineering 42(8): 6. (in Chinese)

24.

Abbott EJ (1933) Specifying surface quality a method based on accurate measurement and comparison. Mech Eng 55:569–572

25.

Kogut L, Etsion I (2002) Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat. Asme J Appl Mech 69(5):657–662. https://doi.org/10.1115/1.1490373CrossRef

26.

Liu JK (2018) Research on Frictional Characteristics of Friction Pairs of Wet Multi-disk Clutches in DSG Tracked Vehicles. Beijing Institute of. Technology (in Chinese)

27.

Yu XX (2018) Dynamic Modeling Analysis and Experimental Study of Synchronizer. Chongqing niversity of. Technology (in Chinese)

28.

Jing Q (2012) Study on the drag loss characteristic of wet shifting clutch. Beijing Institute of. Technology (in Chinese)

29.

Zhang Z, Zou L, Liu H et al (2022) Simulation and Modeling of Dynamic Friction Coefficient of Wet Clutch during Engagement. Intj Automot Technol 23:125–134. https://doi.org/10.1007/s12239-022-0010-5CrossRef

Titel: Modeling and analysis of the synchronization process of synchronizer
verfasst von: Panming Chen
Hua Ding
Jingyan Zhao
Publikationsdatum: 01.12.2024
Verlag: Springer Berlin Heidelberg
Erschienen in: Forschung im Ingenieurwesen / Ausgabe 1/2024
Print ISSN: 0015-7899
Elektronische ISSN: 1434-0860
DOI: https://doi.org/10.1007/s10010-024-00737-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2024

Development of a workflow to build optimal machine learning models for stress concentration factor regression

Vor- und Nachteile einer Lumped-Mass-Modellierung von Förderbändern am Beispiel eines Zwei-Walzensystems

Theoretical study on measuring steam dryness using matrix conductivity method in steam injection pipelines

Systematische Simulationsstudie zur verformungsmechanischen Stützwirkung an Wellen aus Stahl

Vibration analysis for early pitting detection during operation

Spiral bevel gears tooth geometry based on tooth trace and contact ellipse theory

Premium Partner

Marktübersichten