nach oben

Forschung im Ingenieurwesen

Erschienen in:

01.12.2024 | Originalarbeiten/Originals

Theoretical study on measuring steam dryness using matrix conductivity method in steam injection pipelines

verfasst von: Lei Zeng, Yongfei Yan, Junqi Liu, Zekun Hou, Yuxuan Qi

Erschienen in: Forschung im Ingenieurwesen | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Steam dryness is an important parameter for evaluating the quality of the wet steam injected in heavy oil thermal recovery engineering. The matrix conductivity method is a new steam dryness measurement method based on the wire-mesh measurement principle. Steam dryness is measured indirectly by measuring the gas-liquid distribution in the pipeline. The relationship between the gas-liquid area and steam dryness is derived by combining thermodynamic knowledge to establish a dryness calculation model. The electric field simulation was performed in Ansys Electronics to analyze the effects of wire-mesh layer spacing, liquid position, and size on the electric field measured between layers. A measurement circuit was designed and a simple test platform was built to conduct static measurement tests to obtain the voltage measurement interval. Analyze the errors and optimize the process using a bilinear interpolation method. The contribution of this study is to provide a theoretical basis for the subsequent application of the matrix conductivity method and steam dryness measurement.

Vorheriger Artikel Spur gear teeth reconstruction via direct laser deposition

Nächster Artikel Study on the engagement characteristics of wet multi-plate friction clutch based on separating spring

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Qiang Y, Yushan L, Tingkuan C (1999) Measurement of high pressure steam injection two-phase flow in heavy oil thermal recovery. Oil-Gas Field. Surf Eng 18(4):3–6.

Johnson I D (1987) Method and apparatus for measuring water in crude Oil, United States Patent:NO.4,644,263.

Prasser H M, Böttger A, Zschau J (1998) A new electrode-mesh tomograph for gas-liquid flows. Flow Measurement and Instrumentation 9(2):111–119. https://doi.org/10.1016/S0955-5986(98)00015‑6

Prasser H M, Scholz D, Zippe C (2001) Bubble size measurement using wire-mesh sensors. Flow Measurement and Instrumentation 12:299–312. https://doi.org/10.1016/S0955-5986(00)00046‑7

Lucas D, Krepper E, Prasser HM (2005) Development of co-current air-water flow in a vertical pipe. Int J Multiph Flow 31(12):1304–1328. https://doi.org/10.1016/j.ijmultiphaseflow.2005.07.004CrossRef

Huang SF, Zhang XG, Wang D et al (2006) Wire-mesh capacitance tomography in gas-liquid flows. International. Flows, vol 914. Symposium, on Measurement Techniques for Multiphase, pp 710–716 https://doi.org/10.1063/1.2747503CrossRef

Pietruske H, Prasser HM (2007) Wire-mesh sensors for high-resolving two-phase studies at high pressures and temperatures. Flow Meas Instrum 18(2):87–94. https://doi.org/10.1016/j.flowmeasinst.2007.01.004CrossRef

Omebere-Iyari NK, Azzopardi BJ, Lucas D et al (2008) The characteristics of gas/liquid flow in large risers at high pressures. Int J Multiph Flow 34(5):461–467. https://doi.org/10.1016/j.ijmultiphaseflow.2007.11.001CrossRef

Lucas D, Beyer M, Szalinskai L, Schütz P et al (2010) A new database on the evolution of air-water flows along a large vertical pipe. Int J Therm Sci 49:664–674. https://doi.org/10.1016/j.ijthermalsci.2009.11.008CrossRef

10.

Lucas D, Beyer M, Kussin J, Schütz P (2010) Benchmark database on the evolution of two-phase flows in a vertical pipe. Nucl Eng Des 240:2338–2346. https://doi.org/10.1016/j.nucengdes.2009.11.010CrossRef

11.

Zhiqiang Z (2012) Visualization methods of two-phase flow based on electrical and ray tomography. Tianjin University, China.

12.

Lucas D, Beyer M, Szalinski L (2013) Experimental database on steam-water flow with phase transfer in a vertical pipe. Nucl Eng Des 265:1113–1123. https://doi.org/10.1016/j.nucengdes.2013.10.002CrossRef

13.

Xingtao W, Fang T, Eisemberg J et al (2015) Study on void fraction distribution of plunging jet experiment with wire mesh sensor. Chin J Sensors Actuators 28(7):1008–1015. https://doi.org/10.3969/j.issn.1004-1699.2015.07.012CrossRef

14.

Telkka J, Ylonen A, Hyvarinen J et al (2017) Estimation of velocity fields from the axial wire-mesh sensor data. Nucl Eng Des 336:34–44. https://doi.org/10.1016/j.nucengdes.2017.05.010CrossRef

15.

Haitao W (2021) Study on flow mechanism and measurement method of pseudo-slug flow. Tianjin University, China.

16.

Lee JW, Heo H, Sohn DKHSK (2021) Development of a numerical method for multiphase flows using an electrostatic model in a wire-mesh sensor. Eng Appl Comput Fluid Mech 15(1):344–362. https://doi.org/10.1080/19942060.2021.1876775CrossRef

17.

Jubeom Lee, Min Kim, Hyungmin Park (2021) Single-layer wire-mesh sensor to simultaneously measure the size and rise velocity of micro-to-millimeter sized bubbles in a gas-liquid two-phase flow. International Journal of Multiphase Flow 139:1–15. https://doi.org/10.1016/j.ijmultiphaseflow.2021.103620

18.

Felipe de Assis Dias, Philipp Wiedemann, Eckhard Schleicher, Marco Jose da Silva, Uwe Hampel (2022) Improvement of wire-mesh sensor accuracy via adapted circuit design and integrated energy loss measurement. Measurement Science and Technology 33:1–13. https://doi.org/10.1088/1361-6501/ac6ab4

19.

Lusheng Zhai, Jiawei Qiao, Wenhao Wang, Yuqing Wang (2022) Measurement of Interfacial Characteristics of Horizontal and Inclined Oil—Water Flows by Using Wire-Mesh Sensor. Energies 15:1–22. https://doi.org/10.3390/en15186638

20.

Lucas D, Beyer M, Szalinski L (2010) Experimental investigations on the condensation of steam bubbles injected into subcooled water at 1 MPa. Multiph Sciense Technol 22(1):33–55. https://doi.org/10.1615/MultScienTechn.v22.i1.30CrossRef

21.

Wagner W, Kruse A (2003) Properties of water and steam. Science (Press, BeiJing).

22.

Guilherme MS, Davi SR, Hilton HB et al (2015) Analysis of the electric field behavior in the vicinity of a triple junction, using finite elements method computational simulations. J Electrostat 74:96–101. https://doi.org/10.1016/j.elstat.2015.01.003CrossRef

23.

Cizhang F, Xikui M (2000) Introduction to engineering electromagnetic field. High Educ (Press, BeiJing).

24.

Bin Y (2018) Study on the visualization measurement method of gas-water two-phase flow based on wire mesh sensor (WMS). Chongqing University, China.

25.

Kipping R, Brito R, Scheicher E et al (2016) Developments for the application of the Wire-Mesh Sensor in industries. Int J Multiph Flow 85:86–95. https://doi.org/10.1016/j.ijmultiphaseflow.2016.05.017CrossRef

26.

Lei H, Feng D, Xutong Q (2004) Measurement of gas flow rate of two-phase flow by electrical resistance tomography. Control and Instruments in. Chem Ind 31(2):52–54.

Titel: Theoretical study on measuring steam dryness using matrix conductivity method in steam injection pipelines
verfasst von: Lei Zeng
Yongfei Yan
Junqi Liu
Zekun Hou
Yuxuan Qi
Publikationsdatum: 01.12.2024
Verlag: Springer Berlin Heidelberg
Erschienen in: Forschung im Ingenieurwesen / Ausgabe 1/2024
Print ISSN: 0015-7899
Elektronische ISSN: 1434-0860
DOI: https://doi.org/10.1007/s10010-023-00720-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2024

Systematische Simulationsstudie zur verformungsmechanischen Stützwirkung an Wellen aus Stahl

Vor- und Nachteile einer Lumped-Mass-Modellierung von Förderbändern am Beispiel eines Zwei-Walzensystems

Modeling and analysis of the synchronization process of synchronizer

Spur gear teeth reconstruction via direct laser deposition

On the influence of local deformation on structural dynamic models of bolted lap joints

Spiral bevel gears tooth geometry based on tooth trace and contact ellipse theory

Premium Partner

Marktübersichten