Skip to main content
19242 Suchergebnisse für:

Chassis 

sortieren nach |
"Aktualität" sortiert die Ergebnisse nach Publikationsdatum. "Relevanz" berücksichtigt auch noch andere Faktoren wie zum Beispiel die Häufigkeit der Suchbegriffe im Text.
  1. 2024 | OriginalPaper | Buchkapitel

    Modellierung des Chassis

    Das Chassis bzw. Fahrwerk trägt die beiden Lager und damit die Aufbauten des JetMobils. Zudem befinden sich am Chassis vier Achsen (siehe Detail B), an denen später die Räder mit einer Schnappverbindung montiert werden. Das Chassis wird ebenso wie …

    verfasst von:
    Stefan Junk
    Erschienen in:
    Onshape - kurz und bündig (2024)
  2. 01.05.2024 | OriginalPaper

    Smart Chassis Sensor - das Radgelenk als Datenquelle

    Eine wesentliche Rolle bei der Digitalisierung der Automobiltechnik spielt nicht nur die Software, sondern auch die Verfügbarkeit ebenso robuster wie zuverlässiger Sensoren. Der Smart Chassis Sensor von ZF zeigt eine Kombination mechanischer und …

  3. 01.03.2024 | OriginalPaper

    Leichtbau in der Landmaschinentechnik - CFK-Chassis für Feldhäcksler

    Durch den Einsatz von Faserverbundwerkstoffen im Leichtbau von Strukturkomponenten wie dem Chassis können Landmaschinen signifikant an Gewicht verlieren. Das bringt Vorteile in Bezug auf Zulassung, CO 2 -Ausstoß und Verwindungssteifigkeit, wie ein …

  4. 2024 | OriginalPaper | Buchkapitel

    Future Chassis Systems: Evolution or Revolution?

    The Electrification of the powertrain, digitalization of the vehicle and automated driving are the major drivers of the transformation in the automotive industry. The implementation of the resulting requirements is taking place at the level of the …

    verfasst von:
    Hans-Jörg Feigel
    Erschienen in:
    13th International Munich Chassis Symposium 2022 (2024)
  5. 2024 | Buch

    13th International Munich Chassis Symposium 2022

    Volume 2: chassis.tech plus

    The increasing automation of driving functions and the electrification of powertrains present new challenges for the chassis with regard to complexity, redundancy, data security, and installation space. At the same time, the mobility of the future …

    Buchreihe:
    Proceedings
    Verlag:
    Springer Berlin Heidelberg
  6. 2024 | Buch

    13th International Munich Chassis Symposium 2022

    Volume 1: chassis.tech plus

    The increasing automation of driving functions and the electrification of powertrains present new challenges for the chassis with regard to complexity, redundancy, data security, and installation space. At the same time, the mobility of the future …

    Buchreihe:
    Proceedings
    Verlag:
    Springer Berlin Heidelberg
  7. 01.05.2024 | OriginalPaper

    Smart Chassis Sensor - the Suspension Ball Joint as a Data Source

    Not only software plays a key role in the digitalization of automotive technology, but also the availability of sensors that are as robust as they are reliable. The smart chassis sensor from ZF demonstrates a combination of mechanical and digital …

  8. 2024 | OriginalPaper | Buchkapitel

    Theoretical and Practical Solutions in Fail Operational Chassis Electronics

    By wire systems in vehicles are increasingly used for driver assist and automated driving mainly for steering and braking. Fail operational actuators with FIT rates below 10FIT are the typical challenge.This paper is about what we learned, what we …

    verfasst von:
    Axel Freiwald, Marco Cassol
    Erschienen in:
    13th International Munich Chassis Symposium 2022 (2024)
  9. 2024 | OriginalPaper | Buchkapitel

    Vision EQXX – Innovative Chassis System for a Highly Efficient Electric Vehicle

    With Vision EQXX, Mercedes-Benz brings a highly efficient electric vehicle on the road to show the ultimate performance of its new EV-platforms.This presentation will give an insight in the development of the chassis for this unique …

    verfasst von:
    Dirk Herkenrath
    Erschienen in:
    13th International Munich Chassis Symposium 2022 (2024)
  10. 2024 | OriginalPaper | Buchkapitel

    Clearances Assessment in the Volkswagen Crafter Chassis by Means of the 3D Scan

    In mechanical design, tolerance stack-up has a fundamental role to ensure mechanical coupling among assembly components. To avoid interferences, gaps between connected parts are introduced since the design phase, to compensate for possible …

    verfasst von:
    Francesco Dalle Mura, Luca Puggelli, Rocco Furferi, Lapo Governi
    Erschienen in:
    Design Tools and Methods in Industrial Engineering III (2024)
  11. 16.04.2024 | Chassis | On Our Own | Online-Artikel
    On Our Own

    Developing Innovations: Chassis from Steer-by-wire to AI

    The 15th International Munich Chassis Symposium will once again bring the chassis community together in 2024 to discuss current developments in detail.

  12. 2024 | OriginalPaper | Buchkapitel

    The Key for Future Vehicles—Development of Chassis Components According to Cybersecurity Regulations

    The increasing digitization of vehicles leads to a continuously increasing number of wireless interfaces between the vehicle and components outside. These additional functionalities and interfaces lead to an increasing vulnerability and …

    verfasst von:
    Marcus Perner, Christian Wagner, Martin Gebhardt, Nick Weinhold
    Erschienen in:
    13th International Munich Chassis Symposium 2022 (2024)
  13. 2024 | OriginalPaper | Buchkapitel

    Intelligent Combination of Software Calibration and High Responsive Hydraulics Control for a Low-Noise and Cost-Efficient Semi-Active Chassis System

    A semi-active suspension system is often used to allow a broad spread between ride comfort and handling ability. The performance of the chassis system is directly related to the high responsive hydraulics control as well as the control strategy.

    verfasst von:
    Alexander Alonso, Christian Macrì
    Erschienen in:
    13th International Munich Chassis Symposium 2022 (2024)
  14. 01.03.2024 | OriginalPaper

    Lightweight Design in Agricultural Machinery - CFRP Chassis for Forage Harvesters

    The use of fiber-reinforced composites in the lightweight design of structural components such as chassis can significantly reduce the weight of agricultural machinery. This has advantages in terms of statutory approvals, CO 2 emissions, and …

  15. 2024 | OriginalPaper | Buchkapitel

    Design Simulation for Chassis of Electric Solar Vehicle

    Solar energy is the demanding field in present era and keeping in view the limited resources like petroleum etc., a solar electric vehicle is proposed in this work. CAE analysis of chassis for the solar vehicle has been performed using Hypermesh …

    verfasst von:
    Neetu Verma, Krishan Kumar, O. P. Mishra
    Erschienen in:
    Optimization of Production and Industrial Systems (2024)
  16. Open Access 01.12.2024 | OriginalPaper

    State Estimation of Drive-by-Wire Chassis Vehicle Based on Dual Unscented Particle Filter Algorithm

    Accurate vehicle dynamic information plays an important role in vehicle driving safety. However, due to the characteristics of high mobility and multiple controllable degrees of freedom of drive-by-wire chassis vehicles, the current mature …

  17. 2024 | OriginalPaper | Buchkapitel

    A Chassis Load Dynamic Estimation Method for Distributed Drive Electric Loaders

    To solve the problem that the chassis load of loaders is difficult to obtain, a chassis load dynamic estimation method for distributed electric drive loaders is presented in this paper. Firstly, according to the characteristics of the external …

    verfasst von:
    Weiheng Chen, Yiran Qiao, Ka Xue, Lulu Guo, Xinbo Chen
    Erschienen in:
    Proceedings of China SAE Congress 2023: Selected Papers (2024)
  18. 18.02.2024 | OriginalPaper

    Reduction in Chassis Dynamometer Test Time for Evaluating Energy Economy and Range of Light-Duty Battery Electric Vehicles

    In response to the climate crisis, nations are working to reduce emissions and improve energy efficiency, particularly in the transportation sector through the adoption of electric vehicles. However, the current official test methods for …

  19. 2024 | OriginalPaper | Buchkapitel

    Designing a Mobile High-Pressure Well Service Pump Unit on a Vehicle Chassis

    In the oil and gas industry of a number of countries, long-life fields contain a significant amount of hard-to-recover hydrocarbon reserves, the production of which has been hampered by a lack of technology. Reactivation of old wells and …

    verfasst von:
    D. V. Karabanov, S. O. Kireev, M. V. Korchagina, A. R. Lebedev, A. V. Efimov
    Erschienen in:
    Physics and Mechanics of New Materials and Their Applications (2024)
  20. 01.09.2023 | Report

    14. Münchner Fahrwerk-Symposium - chassis.tech plus 2023

    Die neue Euro-7-Gesetzgebung zu Reifenabrieb und Bremsstaub sowie die Elektrifizierung von Lenkung und Bremse durch X-by-Wire-Technik: Das waren zwei wichtige der vielen diskutierten Themen auf der chassis.tech plus 2023. Sechs Keynotes und 48 …

Suchergebnisse filtern:

Suchoperatoren:

„ ... ... “ Findet Dokumente mit genau dieser Wortgruppe in exakt dieser Schreibweise und Reihenfolge (z.B., "employer branding").
AND / UND Findet Dokumente, in denen beide Begriffe zusammen vorkommen (z.B., vertrieb UND bonus).
OR / ODER Findet Dokumente, in denen einer der beiden oder beide Begriffe vorkommen (z.B., porsche OR volkswagen).
Leerzeichen Findet Dokumente, in denen alle Begriffe vorkommen. Der Leerschritt wird als UND interpretiert (z.B., mensch roboter alltag).
NOT / NICHT Findet Dokumente, in denen der Begriff nach NOT nicht vorkommt (z.B., ford NOT "harrison ford").
COUNT(...)>n Findet Dokumente, in denen der gesuchte Begriff mehr als n mal vorkommt. n steht für eine beliebige Anzahl (z.B., COUNT(getriebe)>8).
NEAR(..., ..., ) Findet Dokumente, in denen beide Begriffe in beliebiger Reihenfolge innerhalb von maximal n Worten zueinander stehen. Empfehlung: wählen Sie zwischen 15 und 30 als maximale Wortanzahl (z.B., NEAR(hybrid, antrieb, 20)).
* Findet Dokumente, in denen der Begriff in Wortvarianten vorkommt, wobei diese VOR, HINTER oder VOR und HINTER dem Suchbegriff anschließen können (z.B., leichtbau*, *leichtbau, *leichtbau*).
? Findet Dokumente mit dem Suchbegriff in verschiedenen Schreibweisen, hier mit s oder z, also organisation und organization. Das ? steht für eine einzige Stelle (z.B., organi?ation).
& + - Sonderzeichen werden als UND interpretiert (z.B., Mann + Hummel).

Sie können Operatoren mit Ihrer Suchanfrage kombinieren, um diese noch präziser einzugrenzen.

Fahren Sie mit der Maus über den Suchoperator, um eine Erklärung seiner Funktionsweise anzuzeigen.